Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU63X300S
AirTAC B06-SU Battery-Optimized Standard Cylinder B06-SU63X300S Specifications
- Model: B06-SU63X300S
- Type: Double-acting pneumatic cylinder (battery-driven systems optimized)
- Bore size: 63mm
- Stroke: 300mm (adjustable cushioning)
- Operating pressure: 0.05–0.9 MPa
- Low friction design: ≤0.008 dynamic friction coefficient
- Cushioning type: Elastic buffer + adjustable external stopper
- Position detection: Pre-drilled M5 mounting slots for magnetic sensors
- Mounting: ISO/VDS Standard Mounting Face with 4x M6 threaded holes
- Temperature range: -20℃ to 80℃ (extended range for solar exposure)
- Cylinder tube material: Anodized aluminum alloy (hard coat 0.03-0.05mm)
- Piston rod: Chrome-plated steel (STS420J2, hardness HRC 20-30)
- Seal material: Heat-resistant NBR + special low-friction coating
- Port size: G1/8 (Rc1/8 optional)
- Weight: 2.8kg (without mounting accessories)
- Dimensions:
- Extended length: 469mm
- Retracted length: 169mm
- Body diameter: 80mm (hexagonal housing)
- Rod end thread: M16×1.5
Energy-efficient cylinder specifically engineered for battery-powered automation systems, featuring 35% reduced air consumption compared to standard models. Anti-corrosion treatment withstands 96hr salt spray test. Integrated wear compensation system maintains consistent performance through 2,000km stroke cycles.
- Mobile solar panel tracking mechanisms
- AGV (Automated Guided Vehicle) lifting systems
- Portable medical oxygen concentrators
- Off-grid agricultural actuators
- Electric vehicle battery pack locking systems
Installation guidelines:
Optimal performance achieved when mounted horizontally. Apply MIL-PRF-81309F grease
every 50,000 cycles. Requires 5μm filtration for desert environments. Not suitable for
vertical pushing loads exceeding 800N without external guides.
| Property | Property Value |
|---|---|
| sku | B06-SU63X300S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.