Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU63X900S
AirTAC B06-SU63X900S Battery-Optimized Standard Cylinder Specifications
- Model: B06-SU63X900S
- Type: Double-acting ISO cylinder (battery system optimized)
- Bore size: 63mm (±0.1mm tolerance)
- Stroke: 900mm (adjustable cushion range: 15-30mm)
- Operating pressure: 0.05–0.8 MPa
- Cushioning type: Rubber buffer with energy absorption coating
- Port size: 1/4" NPT (G1/8 optional)
- Piston rod thread: M16×1.5 (male both ends)
- Position detection: Built-in magnet for sensor mounting (NBR magnet band)
- Material: Aluminum alloy barrel (hard anodized), CR12MoV piston rod
- Seal material: NBR + special low-friction compound
- Temperature range: -20℃ to 80℃ (dry air required below 0℃)
- Protection rating: IP67 (rod extension area IP54)
- Weight: 3.5kg ±2% (without accessories)
- Dimensions: 1002mm(L) × 63mm(Bore Ø) × 78mm(Mounting height)
Engineered for battery-powered systems requiring extended duty cycles, featuring 35% reduced friction resistance compared to standard cylinders. Incorporates anti-corrosion plating (5-8μm thickness) on piston rods and optimized air passage design for low consumption (0.3L/min @ 0.5MPa). Requires class 5 or cleaner air quality.
- Automated guided vehicles (AGV) lifting mechanisms
- Portable solar panel positioning systems
- Medical battery-operated rehabilitation equipment
- Off-grid agricultural automation devices
- Robotic arm joints in mobile service robots
Installation note:
Maintain 0.02mm/m alignment tolerance during mounting. For vertical installations exceeding 45° angle,
use tandem locking nuts on rod end. Lubricate with ISO VG32 hydraulic oil (non-detergent)
during maintenance cycles.
| Property | Property Value |
|---|---|
| sku | B06-SU63X900S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.