Airtac GAC F.R.L. Unit GAC20006SK
The AirTAC Airtac GAC F.R.L. Unit GAC20006SK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialPC
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC20006SK
Outputting cleaned, pressure-set and oil-misted air for a single actuator, this assembly chains a filter, regulator and lubricator on one L-shape bracket with quick clamps. The 1/8in port serves small jigs, and the standard type works across a 0.15-0.9 MPa (20-130 psi) range with a 40 um element. Because the lubricator sits last in the flow path, the oil mist is added downstream of the regulator seat, preventing fouling.
This variant carries a reverse-flow (reflux) valve, shown as a separate pneumatic symbol in the catalogue, alongside a fitted circular gauge reading MPa/psi for the default PT thread. The 25 cc condensate bowl and 36 cc oil capacity dictate frequent checks, but the three units are separately orderable as GAF200-06, GAR200-06 and GAL200-06, so a damaged PC bowl or clogged screen never means scrapping the whole set.
Airtac GAC F.R.L. Unit GAC20006SK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC20006SK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC20006SK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC20006SK Is Used
Small Pneumatic Jigs
Feeds a single small-bore cylinder on a benchtop testing jig with regulated, lubricated air.
Air-Powered Hand Tools
Conditions air for light-duty air screwdrivers or nailing guns requiring a steady 1/8in supply.
Lab Automation
Prepares drive air for compact solenoid valves and actuators on laboratory equipment.
Is the Airtac GAC F.R.L. Unit GAC20006SK the Right Air-Prep Unit?
Choose this 750 g unit for tight panels where tubing cannot support the load, stepping up to the GAC300 if you need a larger 60 cc drain bowl. The semi-auto and manual drain pair fitted here dumps condensate on every pressure drop or on demand, while the 40 um screen suits general plant air. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. The catalogue flow curve for the GAC200 is plotted to 1750 L/min at 0.7 MPa inlet, which is roughly 29% of the GAC300's 3000 L/min envelope, so size up for multi-actuator duties. Remember that max supply is 1.0 MPa and the standard type regulates to 0.9 MPa, leaving only about 0.1 MPa of headroom above the top setting.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC20006SK FAQ
This model operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 25 cc drain bowl, a 36 cc oil bowl, a 40 um element, and weighs 750 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The K indicates that a reverse-flow (reflux) valve is attached. The catalogue shows this as a separate pneumatic symbol with details on its own page, and it is included here alongside the standard semi-auto and manual drain configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC20006SK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.