Airtac GAC F.R.L. Unit GAC200C06AL
The AirTAC Airtac GAC F.R.L. Unit GAC200C06AL is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06AL
Delivering cleaned, regulated and lubricated air for compact pneumatics, this GAC200C06AL assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port pairs with a 40 um element and a lower-pressure type operating range of 0.15-0.4 MPa (20-58 psi). A circular gauge reading MPa/psi is fitted for the default PT thread, and the metal bowl equips an automatic drain that clears condensate without an operator.
Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. Weighing 750 g, this unit is sized for single actuators rather than main headers. If the downstream line must remain strictly oil-free, omit the lubricator and choose a dedicated filter-regulator instead.
Airtac GAC F.R.L. Unit GAC200C06AL Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06AL |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC200C06AL
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06AL Is Used
Small Pneumatic Jigs
Feeds filtered and lubricated air to delicate low-pressure clamping jigs on electronics assembly benches.
Benchtop Actuators
Conditions supply for single-acting cylinders powering light-duty benchtop tooling and testing rigs.
Lab Automation
Regulates stable low-pressure air for sensitive laboratory pick-and-place mechanisms requiring oil mist.
Is the Airtac GAC F.R.L. Unit GAC200C06AL the Right Air-Prep Unit?
This assembly suits low-pressure duties up to 0.4 MPa, so verify your machine never requires the 0.9 MPa standard ceiling before specifying it. The metal bowl offers robustness for industrial settings, while the automatic drain handles wet lines unattended. The 25 cc condensate and 36 cc oil capacities dictate frequent checks compared to larger bodies. For maintenance, the individual elements are GAF200-06, GAR200-06 and GAL200-06. Stepping up to the GAC300 roughly doubles the flow envelope to 3000 L/min at 0.7 MPa inlet, but choosing this L type means accepting a ceiling that is 44% of the standard maximum.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06AL FAQ
It operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the filtering grade is 40 um, and the recommended lubricant is ISO VG 32. It features a 25 cc drain bowl, a 36 cc oil bowl, and weighs 750 g.
The A indicates an automatic drain fitted to the metal bowl, which expels condensate without manual intervention. The L denotes the lower-pressure type, restricting the regulating range to 0.15-0.4 MPa (20-58 psi) instead of the standard 0.9 MPa ceiling.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06AL
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.