Airtac GAC F.R.L. Unit GAC200C06ALW
The AirTAC Airtac GAC F.R.L. Unit GAC200C06ALW is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06ALW
Delivering cleaned, regulated and lubricated air for light-duty pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port pairs with a 5 um element to trap fine particulates before they reach sensitive valves. A metal bowl houses the automatic drain, clearing condensate without an operator. The lower-pressure type governs the outlet from 0.15 to 0.4 MPa (20-58 psi), making it suitable for low-force actuation.
Air passes through the filter first, then the regulator, and finally the lubricator so oil mist is added downstream of the regulator seat. The assembly weighs 750 g and should be panel-mounted rather than supported by its tubing. A circular gauge is fitted, reading MPa/psi for the default PT thread. If your downstream line must remain completely oil-free, omit the lubricator and choose a dedicated filter-regulator instead.
Airtac GAC F.R.L. Unit GAC200C06ALW Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06ALW |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC200C06ALW
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06ALW Is Used
Micro-Assembly Jigs
Feeds low-force grippers and small-bore cylinders handling delicate electronics where a 5 um element protects tiny internal clearances.
Laboratory Pneumatics
Conditions air for benchtop test fixtures requiring stable low pressure up to 0.4 MPa, with the metal bowl resisting solvent splashes.
Pick-and-Place Heads
Supplies clean, lubricated air to miniature vacuum generators and handling valves on automated desktop routing tools.
Is the Airtac GAC F.R.L. Unit GAC200C06ALW the Right Air-Prep Unit?
Choose this assembly for single actuators or small jigs requiring a 5 um element and a 0.15-0.4 MPa (20-58 psi) operating band. The metal bowl suits harsher environments where PC or nylon might not be compatible, though buyers should confirm chemical suitability for aggressive surroundings. The automatic drain is decisive for unattended or wet lines, emptying the 25 cc condensate bowl independently. The 36 cc oil bowl sets the lubrication refill interval. Spares are ordered individually as GAF200-06, GAR200-06 and GAL200-06. Stepping up to the GAC300 increases the plotted flow envelope from 1750 to 3000 L/min at 0.7 MPa inlet, but choosing this L type means accepting a ceiling that is 44% of the standard 0.9 MPa maximum.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06ALW FAQ
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 25 cc drain bowl, a 36 cc oil bowl, uses ISO VG 32 lubricant, and weighs 750 g.
The W code specifies a 5 um element, trapping far finer particles than the standard 40 um grade for precision valves, at the cost of more frequent element service. The A code specifies an automatic drain that clears condensate from the metal bowl without an operator, which is ideal for unattended installations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06ALW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.