Airtac GAC F.R.L. Unit GAC200N06ALWK
The AirTAC Airtac GAC F.R.L. Unit GAC200N06ALWK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200N06ALWK
Delivering cleaned, regulated and lubricated air for pneumatic setups, this assembly integrates a filter, regulator and lubricator on a single L-shape bracket. It is built for the GAC200 size class with a 1/8" port, weighing 750 g. The 5 um element captures fine particles for sensitive instrumentation, while the lower pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi). A circular gauge is fitted to read the set pressure directly.
The automatic drain clears condensate from the 25 cc bowl without an operator, which is ideal for unattended machinery. Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat stays clean. This specific configuration includes a reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol with details on its own page. If the downstream line must remain oil-free, a filter-regulator should be chosen instead.
Airtac GAC F.R.L. Unit GAC200N06ALWK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200N06ALWK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC200N06ALWK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200N06ALWK Is Used
Laboratory Gas Jets
Conditions air for sensitive laboratory benches where precise, low-pressure instrumentation requires finely filtered, lubricated supply.
Micro-Pneumatic Pickers
Feeds small pick-and-place actuators in electronics assembly that depend on a steady 0.4 MPa supply and 5 um cleanliness.
Miniature Positioning Slides
Prepares air for delicate linear guides needing consistent oil mist to protect narrow internal seals from wear.
Is the Airtac GAC F.R.L. Unit GAC200N06ALWK the Right Air-Prep Unit?
The nylon bowl on this unit offers a different build choice compared to the standard PC or metal options, so buyers should confirm chemical compatibility for aggressive surroundings. The 5 um element provides finer filtration than the 40 um standard, trading off more frequent element service for better protection of precision valves. Because the type is lower pressure, the outlet tops out at 0.4 MPa; if the machine may ever need more, this is the wrong part. The PT thread sets the gauge scale to MPa/psi, and the three units are separately orderable as GAF200-06, GAR200-06 and GAL200-06. The 0.4 MPa ceiling is 44% of the Standard type's 0.9 MPa maximum, quantifying exactly what the buyer gives up when choosing this lower pressure variant.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200N06ALWK FAQ
This model operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 25 cc drain bowl, a 36 cc oil bowl, a 5 um element, and weighs 750 g. The recommended lubricant is ISO VG 32 or equivalent.
The K indicates that a reverse-flow (reflux) valve is fitted to this assembly. The catalogue displays this component as a separate pneumatic symbol, and its specific functional details are located on a different page of the documentation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200N06ALWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.