Airtac GAC F.R.L. Unit GAC200N06ASNW
The AirTAC Airtac GAC F.R.L. Unit GAC200N06ASNW is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200N06ASNW
Delivering cleaned, regulated and lubricated air for a single actuator, this AirTAC GAC200N06ASNW combination integrates a filter, regulator and lubricator on one L-shape bracket. The 1/8in port feeds the standard 0.15-0.9 MPa (20-130 psi) range, while the 5 um element traps fine particles for sensitive pneumatic tooling. Because the lubricator sits last in the sequence, oil mist enters downstream of the regulator seat, preventing fouling.
Built with a nylon bowl, the unit carries a 25 cc condensate capacity and a 36 cc oil reservoir. The automatic drain clears liquid without an operator, and no gauge is supplied; the 1/8in gauge connection allows adding one later. Weighing 750 g, the assembly needs a firm panel mount rather than tubing support, and spares follow the GAF200-06, GAR200-06 and GAL200-06 codes.
Airtac GAC F.R.L. Unit GAC200N06ASNW Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200N06ASNW |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200N06ASNW
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200N06ASNW Is Used
Precision Micro-Valves
Feeds instrument air to small pneumatic valves in lab automation, relying on the 5 um element to prevent seat contamination.
Air Screwdrivers
Conditions supply for handheld electric or pneumatic screwdrivers on a light assembly jig, adding necessary oil mist for rotor longevity.
Desktop Test Rigs
Regulates stable low-flow air for benchtop sensor calibration rigs where the 1/8in port and 750 g mass fit tight enclosures.
Is the Airtac GAC F.R.L. Unit GAC200N06ASNW the Right Air-Prep Unit?
Choose this 1/8in port body for light-duty tasks, stepping up to the GAC300 if a machine requires a larger envelope, as the GAC300 flow curve is plotted to 3000 L/min at 0.7 MPa inlet versus 1750 L/min here. The 5 um W element suits precision valves but needs more frequent service than the 40 um default. If the downstream line must stay oil-free, select a filter-regulator instead of this lubricated unit. The PT thread sets a MPa/psi gauge scale, and the automatic drain suits unattended wet lines.
Stepping from this 25 cc bowl to the GAC300 gives 60 cc of condensate capacity, but note that the 1.5 MPa (215 psi) proof pressure against the 1.0 MPa (145 psi) maximum is a 1.5x burst-test margin, not permission to run above 1.0 MPa.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200N06ASNW FAQ
This standard type unit regulates 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, uses a 5 um element, weighs 750 g, holds 25 cc in the drain bowl and 36 cc in the oil bowl, and requires ISO VG 32 lubricant.
The N in the ordering code means no gauge is supplied, so the set pressure cannot be read without adding one. The body features a 1/8in gauge connection for easy field installation, and the default PT thread dictates a MPa/psi scale if a gauge is mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200N06ASNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.