Airtac GAC F.R.L. Unit GAC200N06ASNWK
The AirTAC Airtac GAC F.R.L. Unit GAC200N06ASNWK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200N06ASNWK
Delivering cleaned, regulated and lubricated air for single actuators, this AirTAC combination pre-assembles a filter, regulator and lubricator on one L-shape bracket with quick clamps. The 1/8in port pairs with a 5 um element to trap fine particles before they reach precision valves, while the standard type regulates between 0.15-0.9 MPa (20-130 psi).
Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. Because no gauge is supplied, operators must add one to the 1/8in gauge connection to read the set pressure; this model also includes a reverse-flow (reflux) valve, shown as a separate pneumatic symbol in the catalogue.
Airtac GAC F.R.L. Unit GAC200N06ASNWK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200N06ASNWK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200N06ASNWK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200N06ASNWK Is Used
Precision Micro-Valves
Feeds clean, lubricated air to delicate pneumatic micro-valves in lab automation where the 5 um element protects tight tolerances.
Small Assembly Jigs
Conditions air for a single small-bore cylinder on a benchtop assembly jig, providing stable 1/8in port pressure for repeatable clamping.
Instrument Air Lines
Prepares supply for low-flow analytical instruments, using the automatic drain to remove condensate in intermittently operated wet lines.
Is the Airtac GAC F.R.L. Unit GAC200N06ASNWK the Right Air-Prep Unit?
This 750 g unit suits small jigs rather than main machine headers, offering a 25 cc condensate bowl and 36 cc oil capacity that dictates frequent maintenance checks. The automatic drain clears water without an operator, a decisive feature for unattended lines, while the nylon bowl provides a non-metallic option within the same 1.0 MPa (145 psi) maximum pressure limit. If the downstream line must stay oil-free, choose a filter-regulator instead, as this assembly actively introduces oil mist. Should a component fail, order spares using the shared GAF200-06, GAR200-06 and GAL200-06 designations. Stepping up to the GAC300 roughly doubles the flow envelope to 3000 L/min at 0.7 MPa inlet, compared to this body's 1750 L/min curve, but the GAC200 retains a 0.1 MPa regulation headroom between the 1.0 MPa max supply and the 0.9 MPa top setting.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200N06ASNWK FAQ
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates between -5 to 70 C, weighs 750 g, holds 25 cc in the drain bowl and 36 cc in the oil bowl, and uses ISO VG 32 lubricant.
The N in the code means no gauge is supplied, so you must fit one to the 1/8in connection to monitor settings. The K denotes a reverse-flow valve is attached, which the catalogue details on its own page as a separate pneumatic symbol.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200N06ASNWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.