
The AirTAC GAC F.R.L. Unit GAC200N06ASTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for single actuators, this AirTAC unit combines a filter, regulator and lubricator on one L-shape bracket. It features a 1/8in port, a 40 um element, and operates at 0.15-0.9 MPa (20-130 psi). The nylon bowl and automatic drain keep the 25 cc condensate chamber clear without manual intervention.
Air passes through the filter first, then the regulator sets the pressure, and finally the lubricator adds oil mist downstream so the regulator seat stays clean. A circular gauge is fitted to read the set pressure in MPa/psi for the default NPT thread. This 750 g assembly also includes a reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol with details on its own page. Order code GAC200N06ASTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200N06ASTK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds single-acting cylinders and clamping jigs where space is tight and a 1/8in port provides sufficient flow.
Conditions air for handheld pneumatic tools in a workshop, adding the necessary oil mist for moving parts.
Supplies clean, regulated pressure to small solenoid valves and actuators on laboratory testing equipment.
This 1/8in port body is the smallest in the series, with a catalogue flow curve plotted to 1750 L/min at 0.7 MPa inlet, making it ideal for light-duty jigs. If your machine requires less frequent maintenance, stepping up to the GAC300 body increases the condensate bowl from 25 cc to 60 cc. The automatic drain on this model is decisive for unattended or wet lines, while the 40 um element suits general plant air. Should a component fail, order GAF200-06, GAR200-06 and GAL200-06 as separate spares rather than replacing the whole assembly. Note that max supply is 1.0 MPa and the standard type regulates to 0.9 MPa, leaving only about 0.1 MPa of headroom above the top setting.
AirtacDistr lists every GAC200-06 order code with its price on one page at https://airtacdistr.com/products/airtac-gac200-06-three-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It has a 25 cc drain bowl, a 36 cc oil bowl, uses ISO VG 32 lubricant, and weighs 750 g.
The K indicates that a reverse-flow (reflux) valve is fitted. The catalogue draws this as a separate pneumatic symbol, and specific functional details should be confirmed from its dedicated page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.