Airtac GAC F.R.L. Unit GAC200N06ASWK
The AirTAC Airtac GAC F.R.L. Unit GAC200N06ASWK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200N06ASWK
Delivering cleaned, regulated and lubricated air for single actuators, this AirTAC GAC200N06ASWK F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port feeds a standard pressure range of 0.15-0.9 MPa (20-130 psi). A 5 um element captures fine particles for precision pneumatics, and the fitted circular gauge reads in MPa/psi for the default PT thread.
The nylon bowl equips this compact 750 g unit for specific environmental needs, while the automatic drain clears condensate from the 25 cc sump without operator input. Because the lubricator adds oil mist downstream of the regulator seat, the internal valve stays clean. This model includes a reverse-flow (reflux) valve, shown as a separate pneumatic symbol in the catalogue, and replacement parts are available as GAF200-06, GAR200-06 and GAL200-06.
Airtac GAC F.R.L. Unit GAC200N06ASWK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200N06ASWK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC200N06ASWK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200N06ASWK Is Used
Micro-Pneumatic Clamps
Feeds clean, oil-misted air to small precision clamping jigs on electronics assembly lines, protecting delicate valve internals with its 5 um element.
Benchtop Air Tools
Conditions air for single-station benchtop tools, with the automatic drain handling condensate from intermittent use in a 25 cc bowl.
Lab Actuator Stations
Regulates pressure for individual laboratory actuator setups, providing stable 0.15-0.9 MPa output for repeatable test cycling.
Is the Airtac GAC F.R.L. Unit GAC200N06ASWK the Right Air-Prep Unit?
Choose this 1/8in port body for light-duty tasks, as its 750 g mass suits a panel mount rather than tubing support. The 5 um element offers superior protection for sensitive valves compared to the standard 40 um grade, though it requires more frequent service. The automatic drain is decisive for unattended or wet lines, and the fitted gauge lets operators verify the 0.15-0.9 MPa (20-130 psi) setting directly. If the downstream line must stay oil-free, select a filter-regulator instead of this unit. Note that the maximum supply is 1.0 MPa (145 psi) and the Standard type regulates to 0.9 MPa, leaving only about 0.1 MPa of headroom above the top setting.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200N06ASWK FAQ
This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the drain bowl holds 25 cc, the oil bowl holds 36 cc, the recommended lubricant is ISO VG 32, and it weighs 750 g.
The K indicates that a reverse-flow (reflux) valve is fitted. The catalogue displays this as a distinct pneumatic symbol on its own page, and the unit is configured with this specific ordering difference.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200N06ASWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.