Airtac GAC F.R.L. Unit GAC200N06LW
The AirTAC Airtac GAC F.R.L. Unit GAC200N06LW is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200N06LW
Delivering cleaned, regulated and lubricated air for compact pneumatic setups, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port pairs with a 5 um element to trap fine particles before they reach sensitive valves. Because the lubricator sits downstream of the regulator, oil mist is added last, preventing fouling of the regulating seat.
The lower-pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi), making it suited to low-force actuation rather than general factory lines. A circular gauge is fitted, reading MPa/psi for the default PT thread. The nylon bowl holds 25 cc of condensate and 36 cc of oil, requiring frequent attention due to the small 750 g body class.
Airtac GAC F.R.L. Unit GAC200N06LW Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200N06LW |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC200N06LW
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200N06LW Is Used
Micro-Actuator Lines
Feeds low-pressure cylinders in delicate electronics pick-and-place machines where a 1/8in port and 5 um filtration protect tiny precision valves.
Laboratory Pneumatics
Conditions air for benchtop analytical instruments operating below 0.4 MPa, utilizing the fitted gauge to monitor the exact MPa/psi scale.
Small Assembly Jigs
Supplies oil mist to small gripper tools on manual assembly fixtures, relying on the 36 cc oil bowl for localized lubrication.
Is the Airtac GAC F.R.L. Unit GAC200N06LW the Right Air-Prep Unit?
Choose this assembly for single actuators or small jigs where space is tight and supply pressure is inherently low. The 5 um element provides finer filtration than the standard 40 um grade, ideal for instrument air, though it will require more frequent replacement. The semi-auto and manual drain pair is fitted, meaning condensate dumps on pressure drops or via manual operation. If your downstream line must remain completely free of oil, omit the lubricator and select a filter-regulator instead. Replacement parts follow the body-port suffix exactly: GAF200-06, GAR200-06 and GAL200-06. Note that the 0.4 MPa ceiling is 44% of the standard 0.9 MPa maximum, so verify your machine will never demand higher pressure.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200N06LW FAQ
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the filtering grade is 5 um, and it uses ISO VG 32 lubricant. The drain bowl holds 25 cc, the oil bowl holds 36 cc, and the unit weighs 750 g.
The L indicates a lower-pressure type, limiting the regulation range to 0.15-0.4 MPa (20-58 psi). If your application ever requires pressure above 0.4 MPa, this is the wrong part, as the standard S type regulates up to 0.9 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200N06LW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.