Airtac GAC F.R.L. Unit GAC200N06SW
The AirTAC Airtac GAC F.R.L. Unit GAC200N06SW is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200N06SW
Delivering cleaned, regulated and lubricated air for single actuators, the GAC200N06SW is a complete pneumatic preparation assembly combining a filter, regulator and lubricator on one L-shape bracket. This compact 750 g unit features a 1/8in port and uses a 5 um element to trap fine particles before they reach sensitive valves. The standard pressure range is 0.15-0.9 MPa (20-130 psi).
Air passes through the filter first, then the regulator, with oil mist added last downstream of the regulator seat to prevent fouling. A circular gauge is fitted, reading MPa/psi for the default PT thread, so operators can verify the set pressure directly. The nylon bowl houses a 25 cc condensate capacity and a 36 cc oil capacity, while the semi-auto and manual drain pair clears accumulated water.
Airtac GAC F.R.L. Unit GAC200N06SW Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200N06SW |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC200N06SW
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200N06SW Is Used
Micro-Pneumatic Clamps
Feeds clean, lubricated air to small precision clamping cylinders in electronics assembly fixtures.
Laboratory Air Tools
Conditions air for delicate benchtop laboratory air tools requiring fine 5 um particle filtration.
Single Actuator Jigs
Supplies a stable 0.15-0.9 MPa pressure to a single actuator on a dedicated welding jig.
Is the Airtac GAC F.R.L. Unit GAC200N06SW the Right Air-Prep Unit?
Choose this 1/8in port body for light-duty tasks, stepping up to the GAC300 with its 3000 L/min plotted flow envelope at 0.7 MPa inlet if a machine requires higher air volumes. The 5 um W element suits precision instrumentation but demands more frequent service than the standard 40 um grade. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. Replacement spares follow the body-port suffix exactly: GAF200-06, GAR200-06 and GAL200-06. The 1.0 MPa maximum supply leaves only about 0.1 MPa of headroom above the 0.9 MPa standard ceiling, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200N06SW FAQ
The standard pressure range is 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, uses a 25 cc drain bowl and a 36 cc oil bowl, weighs 750 g, and requires ISO VG 32 lubricant.
The N before the port indicates a nylon bowl, while the W after the type code signifies a 5 um filtering element for trapping finer particles than the standard 40 um grade.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200N06SW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.