verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100UT

The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X100UT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ20 mm
  • Stroke100 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionFixed TPU bumper pads
$39.60 $47.10Save 15% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI20 stroke, mounting and version on one page All MI20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100UT

Delivering 157 N of push force at 0.5 MPa, the AirTAC MI20X100UT is a double-acting round-body mini cylinder built for compact automation. Its stainless-steel barrel and Ø8 mm rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. The riveted construction keeps the unit light, while fixed TPU bumper pads absorb impact at the stroke ends. This specific SKU features a 90-degree U back cover, orienting the 1/8 inch port neatly for tight machinery layouts.

Because it conforms to ISO 6432 mounting dimensions, this Ø20 mm unit drops directly into standard mini-cylinder brackets and clevises. For practical sizing, plan for a safe working load of about 94 N, which lets you lift roughly 8 kg vertically with a 2:1 safety margin. Note that this base configuration lacks a magnet, meaning it cannot host CMSG, DMSG or EMSG sensors without switching to the -S variant. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100UT Technical Specifications

ModelAirtac MI16-20 Stainless Steel Mini Cylinder MI20X100UT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ20 mm
Stroke100 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N185 N
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100UT

MIISO 6432 round-body mini cylinder (double-acting).
20Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100UT Is Used

conveyor_belt

Package Divert Gate

Actuates a lightweight routing flap on a packaging line, using the 157 N push force to swing parcels onto adjacent belts.

science

Lab Sample Ejector

Ejects plastic sample trays from a testing carousel, where the stainless build resists chemical splashes and the U cover keeps hoses tidy.

precision_manufacturing

Textile Tension Arm

Pushes a tensioning roller into woven fabric, relying on the 100 mm stroke and fixed TPU bumpers to maintain consistent material feed.

Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100UT the Right Cylinder?

When sizing this 100 mm stroke model, compare it against its neighbours: stepping down to the Ø16 bore drops the 0.5 MPa push force to 100.5 N, while upgrading to the Ø25 bore raises it to 245.3 N. The 1/8 inch port and M8x1.25 male rod thread are fixed by the Ø20 bore. If your mechanism needs position feedback, select the MI20X100UT-S instead, as this standard SKU has no internal magnet for switches. The 90-degree rear cover is ideal when axial port routing would clash with frame members.

Remember that the fixed TPU bumpers only decelerate the piston near the end of travel; they do not act as a brake. If air pressure drops or the valve is centred, the rod will drift and cannot hold a suspended load. To secure a vertical payload safely, install an external pilot-operated check valve or a dedicated rod lock. At a 100 mm extension, also verify your guiding structure to prevent rod bending under side loads.

AirtacDistr lists every MI20 order code with its price on one page at https://airtacdistr.com/products/airtac-mi20-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100UT FAQ

At 0.5 MPa it provides 157 N push and 131.9 N pull. At 0.7 MPa it provides 219.8 N push and 184.7 N pull. The theoretical maximum force is 32 kgf at 1.0 MPa. The air port is 1/8 inch.

No, this specific SKU does not include a magnet, so CMSG, DMSG and EMSG switches will not function. You must order the -S variant (MI20X100UT-S) for position sensing. The unit uses ISO 6432 mounting dimensions and fixed TPU bumper pads rather than adjustable cushions.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100UT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.