
The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X160UT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust light-duty tasks. The Ø20 mm bore uses a 1/8 inch port and an M8x1.25 male rod thread. Its riveted stainless barrel and rod resist mild corrosion, outlasting painted alternatives in damp or washdown settings. Built-in fixed TPU bumper pads absorb stroke-end impact without requiring adjustment.
For practical sizing, plan for roughly 94 N of actual work at 0.5 MPa, which equates to lifting about 8 kg vertically with a safe 2:1 margin. The U suffix denotes a 90-degree rear cover, orienting the supply port sideways for tight installations. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches. Order code MI20X160UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI20X160UT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes lightweight cardboard cartons on a packaging line using 157 N of thrust, surviving occasional washdown thanks to the stainless build.
Utilises the 90-degree U rear cover to fit within a narrow loom frame, maintaining thread tension across a 160 mm travel distance.
Lifts a hopper lid weighing approximately 8 kg vertically, operating safely within the calculated 2:1 load margin at 0.5 MPa.
When sizing this 160 mm stroke unit, consider the neighbouring bores: the Ø16 generates 100.5 N push while the Ø25 provides 245.3 N at 0.5 MPa. If your payload drops when air is lost, note that the TPU bumpers only decelerate the stroke end and do not function as a lock; an external pilot check valve or rod lock is required to hold a suspended load. The 160 mm extension demands attention to side loading, so ensure rigid front mounting or a guide to prevent rod bending. Conforming to ISO 6432 mounting dimensions, it drops directly into standard mini-cylinder brackets and clevises.
AirtacDistr lists every MI20 order code with its price on one page at https://airtacdistr.com/products/airtac-mi20-mini-air-cylinder
Quick checklist
At 0.5 MPa it provides 157 N push and 131.9 N pull. At 0.7 MPa it yields 219.8 N push and 184.7 N pull. The theoretical maximum force is 32 kgf at 1.0 MPa. The air port size is 1/8 inch.
No, this specific SKU lacks the internal magnet. You must select the -S variant to use CMSG, DMSG or EMSG switches. The unit conforms to ISO 6432 mounting dimensions and uses fixed TPU bumper pads rather than an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.