verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X175UT

The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X175UT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ20 mm
  • Stroke175 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionFixed TPU bumper pads
$45.66 $53.16Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI20 stroke, mounting and version on one page All MI20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X175UT

Delivering 157 N of push force at 0.5 MPa, the AirTAC MI20X175UT is a double-acting round-body mini cylinder built from a stainless-steel barrel and rod. This riveted construction shrugs off mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. The U suffix denotes a 90-degree rear cover, orienting the 1/8 inch air port neatly for tight machinery layouts.

At 0.5 MPa it yields a safe working load of roughly 94 N, letting you lift about 8 kg vertically with a 2:1 safety margin. The Ø20 mm bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets. Fixed TPU bumper pads absorb the stroke-end impact across the 175 mm travel, and because this specific SKU lacks the -S magnet, it cannot host CMSG, DMSG or EMSG sensors. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X175UT Technical Specifications

ModelAirtac MI16-20 Stainless Steel Mini Cylinder MI20X175UT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ20 mm
Stroke175 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N185 N
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI20X175UT

MIISO 6432 round-body mini cylinder (double-acting).
20Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X175UT Is Used

conveyor_belt

Package Diverter Arm

Actuates a routing flap on a packaging conveyor, using the 157 N push force to redirect cartons at high speed without overwhelming the mechanism.

factory

Textile Loom Tensioner

Maintains thread tension in a humid textile facility, where the stainless-steel rod resists mild corrosion and the 90-degree U cover keeps air lines clear of moving yarn guides.

precision_manufacturing

Small Press Ejector

Kicks stamped micro-parts out of a die bed over the 175 mm stroke, relying on fixed TPU bumper pads to quietly absorb the end-of-stroke impact.

Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X175UT the Right Cylinder?

When sizing this 20 mm bore, stepping down to the Ø16 class drops the output to 100.5 N push at 0.5 MPa, while moving up to the Ø25 bore raises it to 245.3 N. This 175 mm stroke is well within the 500 mm maximum standard stroke limit, keeping the unit as a readily available configuration. The 1/8 inch port and M8x1.25 male rod thread are fixed by the bore size.

Because the standard MI uses fixed TPU bumpers rather than an adjustable air cushion, look at the MIC variant if you need variable deceleration at high speeds. Remember that a plain double-acting cylinder drifts if air pressure is lost or the valve is centred; the bumper only softens the end of travel and will not lock the load. Install an external pilot check valve or rod lock if you need to hold a vertical position securely.

AirtacDistr lists every MI20 order code with its price on one page at https://airtacdistr.com/products/airtac-mi20-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X175UT FAQ

This double-acting cylinder uses a 1/8 inch air port. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.

No, this specific SKU does not include a magnet, so it cannot host CMSG, DMSG or EMSG switches. You would need the -S variant for position sensing. It does, however, use standard ISO 6432 mounting dimensions for easy bracket integration.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI20X175UT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.