
The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X200SCALBT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles a 200 mm stroke with a Ø8 mm piston rod. The riveted barrel and rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. Because it uses the ISO 6432 mounting interface, it drops directly into standard mini-cylinder brackets without redesign.
The built-in magnet (-S) supports CMSG, DMSG and EMSG switches for position sensing, while fixed TPU bumper pads absorb the impact at stroke end. For real-world sizing, plan for roughly 94 N of actual work at 0.5 MPa, which means it lifts about 8 kg vertically with a safe 2:1 margin. Air connects via a 1/8 inch port. Order code MI20X200SCALBT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI20X200SCALBT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging line, using the 157 N push force to redirect cartons at speed.
Adjusts yarn tension arms in a humid textile facility where the stainless build prevents mild corrosion.
Extends 200 mm to press labels onto pallet loads, relying on the LB foot mount for rigid alignment.
When sizing this 20 mm bore, stepping down to the Ø16 class drops the 0.5 MPa push force to 100.5 N, whereas moving up to the Ø25 bore raises it to 245.3 N. The included LB foot bracket and CA pivot back cover provide stable base mounting, and the -S magnet enables electronic or reed sensing. Keep in mind that a plain cylinder drifts if air pressure drops; use an external rod lock or pilot check valve to hold a suspended load securely. At 200 mm, also verify side loading to avoid bending the rod.
AirtacDistr lists every MI20 order code with its price on one page at https://airtacdistr.com/products/airtac-mi20-mini-air-cylinder
Quick checklist
This 20 mm bore cylinder has a 1/8 inch port. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.
It uses fixed TPU bumper pads that decelerate the stroke end but do not act as an adjustable air cushion. The piston will drift if air is lost, so an external rod lock or pilot check valve is required to hold a vertical load.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.