verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X250CAT

The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X250CAT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 250mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ20 mm
  • Stroke250 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionFixed TPU bumper pads
$51.97 $59.47Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI20 stroke, mounting and version on one page All MI20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X250CAT

Delivering 157 N of push force at 0.5 MPa, the AirTAC MI20X250CAT is a double-acting round-body mini cylinder built for demanding automation tasks. The stainless-steel barrel and piston rod resist mild corrosion, giving it a real edge over painted-steel alternatives in damp or washdown environments. Its Ø20 mm bore uses a 1/8" port and an M8x1.25 male rod thread, while the 250 mm stroke falls well within the 500 mm standard limit for this size.

The riveted construction keeps the body compact, and fixed TPU bumper pads absorb the impact at stroke extremes. For practical sizing, plan for a safe working load of about 94 N, which means this actuator can comfortably lift an 8 kg part vertically with a 2:1 safety margin. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X250CAT Technical Specifications

ModelAirtac MI16-20 Stainless Steel Mini Cylinder MI20X250CAT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ20 mm
Stroke250 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N185 N
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI20X250CAT

MIISO 6432 round-body mini cylinder (double-acting).
20Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X250CAT Is Used

conveyor_belt

Package Diverter Gate

Actuates a routing flap on a packaging line, using the CA pivot mount to swing the 250 mm stroke and redirect boxes smoothly.

warehouse

Vertical Parts Lift

Raises lightweight plastic totes weighing up to 8 kg between conveyor tiers, leveraging the 157 N push force at 0.5 MPa.

engineering

Welding Shield Positioner

Deploys a heat shield on a robotic welding cell, where the stainless steel construction withstands spatter and ambient humidity.

Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X250CAT the Right Cylinder?

When sizing this 20 mm bore actuator, compare it against its neighbours: a 16 mm bore provides 100.5 N of push at 0.5 MPa, while stepping up to a 25 mm bore yields 245.3 N. The 250 mm stroke provides ample travel but requires attention to side loading; ensure your front mounting guides the load to prevent rod bending over that distance. The CA back cover equips the cylinder for pivot or clevis mounting, ideal for articulating mechanisms.

Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centred, as the TPU bumpers only decelerate the end of stroke and act as neither a brake nor a lock. To suspend a load safely mid-cycle, integrate an external pilot-operated check valve or a dedicated rod lock. If your application requires position feedback, you must select the -S magnet variant to enable sensor mounting.

AirtacDistr lists every MI20 order code with its price on one page at https://airtacdistr.com/products/airtac-mi20-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X250CAT FAQ

This 20 mm bore cylinder features a 1/8" port and an M8x1.25 male rod thread. At 0.5 MPa it generates 157 N of push force and 131.9 N of pull force. At 0.7 MPa the push increases to 219.8 N and the pull to 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa.

No, because this specific SKU does not include the -S magnet, it cannot accept CMSG, DMSG or EMSG magnetic switches. You would need to order the -S variant of this cylinder to enable switch mounting. The unit does conform to ISO 6432 mounting dimensions and features a CA pivot clevis for easy installation.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI20X250CAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.