
The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X25CAT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact automation with ease. The Ø20 mm bore uses a 1/8" port and an M8x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. Built to ISO 6432 mounting dimensions, it drops directly into standard mini-cylinder brackets.
The riveted construction keeps the unit light, while fixed TPU bumper pads decelerate the piston at stroke ends. Plan for a safe working load of about 94 N, which easily lifts an 8 kg part vertically with a 2:1 margin. This specific SKU lacks a magnet, so it cannot accept CMSG, DMSG or EMSG position switches without upgrading to the -S variant. Order code MI20X25CAT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI20X25CAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
The short 25 mm stroke and rear CA clevis make it ideal for rotating a small sorting flap or pivot arm on a packaging line.
Provides the 157 N push needed to deflect lightweight cartons on a conveyor belt without overwhelming the mechanism.
Stainless steel construction allows safe use in humid washdown zones for ejecting small containers from a filling station.
When sizing this actuator, the Ø16 bore below offers 100.5 N of push at 0.5 MPa, whereas the Ø25 bore above steps up to 245.3 N. This 20 mm model hits a solid middle ground for 157 N tasks. The rear CA pivot cover suits articulated clevis mounts, complementing LB foot, FA flange and TC trunnion options. Because this SKU has no -S suffix, it cannot host a magnetic sensor. If air pressure drops, the piston will drift; the bumpers only soften the end of travel rather than locking the load, so add an external rod lock or pilot check valve if you need to hold position.
AirtacDistr lists every MI20 order code with its price on one page at https://airtacdistr.com/products/airtac-mi20-mini-air-cylinder
Quick checklist
At 0.5 MPa it pushes with 157 N and pulls with 131.9 N. At 0.7 MPa the push is 219.8 N and the pull is 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa. The air port size is 1/8".
Yes, the Ø20 mm body conforms to ISO 6432 mounting dimensions, fitting standard brackets. The rear CA cover provides a pivot point. However, this SKU lacks a magnet, so you cannot mount CMSG, DMSG or EMSG switches on it; you need the -S variant for sensing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.