
The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X400SCMLBT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 400mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 400 mm linear movements. The Ø20 mm bore uses a 1/8 inch port and an M8x1.25 male rod thread. Its riveted stainless barrel and rod resist mild corrosion, offering a real advantage over painted alternatives in damp or washdown environments. Fixed TPU bumper pads absorb stroke-end impacts to protect your mechanism.
For practical sizing, plan for about 94 N of real work at 0.5 MPa, which translates to safely lifting an 8 kg load vertically with a 2:1 margin. The built-in piston magnet supports CMSG, DMSG and EMSG switches for position detection. Because it follows ISO 6432 mounting dimensions, this unit drops directly into standard mini-cylinder brackets and clevises. Order code MI20X400SCMLBT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI20X400SCMLBT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging conveyor, using the 400 mm stroke to shift parcels between lanes while the stainless body withstands humid warehouse air.
Deploys the full 400 mm travel to index heavy fabric beams into a winding machine, relying on the 157 N push force to overcome initial rolling resistance.
Moves sample racks between testing stations in a washdown laboratory setting, where the rolled stainless construction prevents corrosion from chemical cleaning agents.
When sizing this 400 mm stroke unit, compare it against adjacent bores: the smaller Ø16 generates 100.5 N push, while the larger Ø25 yields 245.3 N at 0.5 MPa. This model includes an LB foot mount and a CM round rear cover for stable base mounting. The extended 400 mm travel demands careful alignment to prevent rod bending and premature seal wear from side loads.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered, as the fixed TPU bumpers only decelerate the stroke end and act as neither a lock nor a brake. To suspend a vertical load safely during an air loss event, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every MI20 order code with its price on one page at https://airtacdistr.com/products/airtac-mi20-mini-air-cylinder
Quick checklist
This Ø20 mm bore cylinder features a 1/8 inch port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum force of 32 kgf at 1.0 MPa.
The fixed TPU bumper pads only decelerate the piston near the stroke end and do not function as a brake, so the rod will drift if air is lost; use a pilot check valve for holding. The included magnet (-S) allows direct mounting of CMSG, DMSG and EMSG switches for position sensing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.