verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60CAT

The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X60CAT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ20 mm
  • Stroke60 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionFixed TPU bumper pads
$37.45 $44.95Save 16% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI20 stroke, mounting and version on one page All MI20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60CAT

Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles a 60 mm stroke with a CA pivot clevis. The 1/8 inch port supplies the Ø8 mm rod, and the riveted stainless barrel shrugs off mild corrosion better than painted alternatives in damp production areas. Fixed TPU bumper pads absorb end-of-stroke impact without the complexity of adjustable cushioning.

Because it conforms to the ISO 6432 mounting interface, the body drops directly into standard mini-cylinder brackets. Plan for a real work rate of roughly 94 N, or lifting about 8 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without upgrading to the -S version. Order code MI20X60CAT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60CAT Technical Specifications

ModelAirtac MI16-20 Stainless Steel Mini Cylinder MI20X60CAT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ20 mm
Stroke60 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N185 N
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60CAT

MIISO 6432 round-body mini cylinder (double-acting).
20Bore size in mm.
×60Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60CAT Is Used

conveyor_belt

Package Diverter Arm

Pivots a guide rail using the CA clevis to sort medium-weight cartons on a packaging line, utilising the 157 N push force to deflect items smoothly.

package_2

Pouch Sealing Press

Closes a lightweight sealing jaw over flexible film pouches, where the 60 mm stroke and fixed TPU bumpers provide consistent, low-impact clamping.

factory

Textile Loom Tensioner

Adjusts a yarn tensioning idler in a damp textile environment, relying on the stainless steel barrel to resist humidity while maintaining steady pressure.

Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60CAT the Right Cylinder?

When sizing this 20 mm bore, the smaller Ø16 generates 100.5 N of push at 0.5 MPa, while stepping up to the Ø25 yields 245.3 N. Choose the 20 mm bore when your load sits right in that mid-range sweet spot. The included CA rear clevis is ideal for pivoting loads, and you can pair it with LB foot, FA flange or TC trunnion brackets using the ISO 6432 dimensions.

Remember that the fixed TPU bumpers only decelerate the piston near the stroke ends; they do not act as a brake. If your pivot load must remain suspended during a loss of air pressure or valve centring, the piston will drift. Install an external rod lock or a pilot-operated check valve to hold the position securely.

AirtacDistr lists every MI20 order code with its price on one page at https://airtacdistr.com/products/airtac-mi20-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60CAT FAQ

At 0.5 MPa it provides 157 N push and 131.9 N pull. At 0.7 MPa it provides 219.8 N push and 184.7 N pull. The theoretical maximum force is 32 kgf at 1.0 MPa. The air port size is 1/8 inch.

No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG switches. You would need the -S variant for position sensing. It uses fixed TPU bumper pads rather than an adjustable air cushion.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60CAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.