verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60SUT

The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X60SUT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ20 mm
  • Stroke60 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionFixed TPU bumper pads
$39.87 $47.37Save 15% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI20 stroke, mounting and version on one page All MI20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60SUT

Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact automation with ease. The riveted barrel and rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. Its 1/8" port and 60 mm stroke provide snappy actuation, while the built-in piston magnet supports CMSG, DMSG, or EMSG switches for position sensing.

Because the Ø20 bore uses the ISO 6432 mounting interface, it drops directly into standard mini-cylinder brackets and clevises. In practical terms, you can plan for about 94 N of real work at 0.5 MPa, which means it safely lifts an 8 kg part vertically with a 2:1 margin. Fixed TPU bumper pads absorb the stroke-end impact to protect your mechanism. Order code MI20X60SUT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60SUT Technical Specifications

ModelAirtac MI16-20 Stainless Steel Mini Cylinder MI20X60SUT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ20 mm
Stroke60 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N185 N
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60SUT

MIISO 6432 round-body mini cylinder (double-acting).
20Bore size in mm.
×60Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60SUT Is Used

conveyor_belt

Package Diverting Gate

Actuates a lightweight routing flap on a packaging line, using the 8 kg vertical lift capacity to swing the gate and redirect cartons efficiently.

science

Lab Sample Ejection

Pushes prepared specimen trays out of a testing station, where the stainless build resists chemical moisture and the 60 mm stroke clears the work area.

warehouse

Tote Positioning Stop

Functions as a pneumatic stop pin for small storage totes, relying on the 157 N thrust to halt movement without bouncing the load.

Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60SUT the Right Cylinder?

When sizing this 60 mm stroke unit, consider the neighbouring bores: the Ø16 pushes 100.5 N at 0.5 MPa for lighter fixtures, while the Ø25 steps up to 245.3 N for heavier indexing. This model includes the -S magnet for sensing and a U-style 90-degree rear cover, which orients the port and pivot cleanly for tight layouts. For long-stroke setups, watch out for side loads that could bend the 8 mm rod.

Remember that a standard cylinder drifts when air is lost or the valve centres, as the TPU pads only decelerate the end of travel rather than locking the load. If your application requires strict position holding, install an external rod lock or a pilot-operated check valve alongside the actuator.

AirtacDistr lists every MI20 order code with its price on one page at https://airtacdistr.com/products/airtac-mi20-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60SUT FAQ

At 0.5 MPa it pushes 157 N and pulls 131.9 N; at 0.7 MPa it pushes 219.8 N and pulls 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa. This Ø20 bore uses a 1/8" air port and an M8x1.25 male rod thread.

Yes, the -S suffix means it has a built-in piston magnet ready for CMSG, DMSG, or EMSG switches. This unit features a U-style 90-degree back cover for compact pivot mounting, and the Ø20 body conforms to ISO 6432 mounting dimensions for standard brackets.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI20X60SUT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.