
The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X80CMT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Generating 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles an 80 mm stroke with a sturdy Ø8 mm piston rod. The riveted barrel and rod resist mild corrosion, outperforming painted alternatives in damp or washdown settings. Its rear CM round end provides a clean, compact profile for tight machine envelopes.
Designed to ISO 6432 mounting dimensions, the unit drops directly into standard mini-cylinder brackets and clevises. The fixed TPU bumper pads absorb end-of-stroke impact without offering adjustable cushioning. For position feedback, you would need the -S magnet version, as this base SKU lacks a magnet and cannot host CMSG, DMSG, or EMSG switches. It operates on a 1/8" port at speeds between 30-800 mm/s. Order code MI20X80CMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI20X80CMT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes light cardboard cartons on a packaging line using 157 N of thrust, where the stainless build survives occasional washdowns.
Ejects molded plastic parts from a press over an 80 mm travel distance, relying on the fixed TPU pads to soften the retraction impact.
Acts as a momentary stop for bins on a gravity roller conveyor, dropping down 80 mm to halt workflow before resetting.
When sizing this 20 mm bore, the adjacent 16 mm option yields 100.5 N push at 0.5 MPa, while stepping up to the 25 mm bore provides 245.3 N. Plan for roughly 94 N of actual work at 0.5 MPa, which safely lifts an 8 kg vertical load with a 2:1 margin. An 80 mm stroke is well within the 500 mm maximum, though keeping side-loads minimal protects the rod from bending.
Because this is a standard double-acting cylinder, venting the air or centering the valve lets the piston drift; the TPU pads only decelerate the stroke end and do not lock the load. To suspend a weight safely, install an external rod lock or a pilot-operated check valve. You can mount it using LB foot, FA flange, SDB pivot, or TC trunnion hardware.
AirtacDistr lists every MI20 order code with its price on one page at https://airtacdistr.com/products/airtac-mi20-mini-air-cylinder
Quick checklist
At 0.5 MPa it pushes 157 N and pulls 131.9 N. At 0.7 MPa it pushes 219.8 N and pulls 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa. The air port is 1/8 inch.
No, this specific SKU lacks a magnet and cannot host CMSG, DMSG, or EMSG switches. You must select the -S variant for position sensing. It uses fixed TPU bumper pads rather than an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.