
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X100CAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work in compact spaces. The 25 mm bore pairs a 10 mm piston rod with a 1/8" port and an M10x1.25 male thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. Fixed TPU bumper pads absorb stroke-end impact to protect the mechanism.
For practical sizing, plan for a safe working load of roughly 147 N rather than the absolute maximum. This translates to lifting about 12.5 kg vertically with a 2:1 safety margin. The CA back cover provides a rear pivot clevis for articulated mounting. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches. Order code MI25X100CAT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X100CAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
The CA rear clevis pairs perfectly with swing clamps on welding fixtures, using the 245.3 N push force to secure steel tubing during tack welding.
Routes heavy cartons on packaging lines where the stainless build survives occasional washdowns and the 100 mm stroke pushes diverts cleanly.
Acts as a robust stop on roller conveyors; the 12.5 kg vertical lift capacity easily halts lightweight pallets without bouncing.
When sizing this 25 mm bore, compare it against its neighbours: a 20 mm bore yields 157.0 N push at 0.5 MPa, while stepping up to a 32 mm bore provides 402.2 N. This model includes a CA rear pivot cover, making it ideal for pivoting mechanisms where a fixed foot mount would bind. The 100 mm stroke is well within the 500 mm maximum, though side loads should still be minimized to avoid bending the 10 mm rod.
Note that a standard double-acting cylinder drifts when air is lost or a valve is centred. The TPU bumpers only decelerate the stroke end and do not function as a lock or brake. To suspend a load safely, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
AirtacDistr lists every MI25 order code with its price on one page at https://airtacdistr.com/products/airtac-mi25-mini-air-cylinder
Quick checklist
This 25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG or EMSG switches. You would need the -S variant for sensing. It uses the ISO 6432 mounting interface for standard brackets and relies on fixed TPU bumper pads for end-of-stroke deceleration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.