verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125RT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X125RT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 125mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke125 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$46.25 $53.75Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125RT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work within a compact footprint. The Ø25 mm bore uses a 1/8 inch air port and an M10x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted-steel alternatives in damp or washdown environments. Fixed TPU bumper pads absorb the stroke-end impact to protect the mechanism.

Because the 245.3 N rating leaves a margin for friction, plan for about 147 N of real work at 0.5 MPa, which means it can safely lift a 12.5 kg part vertically with a 2:1 safety factor. The rear R cover features an axial-in port orientation, simplifying plumbing where side clearance is tight. As this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches without changing to a magnetised variant. Order code MI25X125RT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125RT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X125RT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke125 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125RT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×125Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125RT Is Used

conveyor_belt

Package Diverting Gate

Actuates a routing flap on a packaging line, using the 245.3 N push force to redirect cartons weighing up to 12 kg into secondary lanes.

precision_manufacturing

Press Pin Insertion

Drives a small dowel pin into an aluminium housing on an assembly fixture, relying on the 1/8 inch port for rapid extension and retraction.

warehouse

Pallet Stopper Arm

Raises a mechanical stop to halt empty pallets on a roller conveyor, where the stainless build withstands ambient humidity and dust.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125RT the Right Cylinder?

When sizing this 125 mm stroke unit, the neighbouring Ø20 bore offers 157.0 N push at 0.5 MPa, while stepping up to the Ø32 provides 402.2 N if your payload exceeds the 147 N safe working load calculated for this model. The Ø25 bore conforms to ISO 6432 mounting dimensions, so it drops directly into standard mini-cylinder brackets, foot mounts (LB), flanges (FA) and TC trunnions. For this 125 mm stroke, ensure your front mounting guides the load to prevent rod bending and premature seal wear.

This standard MI relies on air to both extend and retract. If air pressure drops or the valve is centred, the piston will drift and cannot maintain a vertical load. The fixed TPU bumpers only decelerate the stroke end rather than locking the rod. To hold a suspended load securely, fit an external pilot-operated check valve or a dedicated rod lock.

AirtacDistr lists every MI25 order code with its price on one page at https://airtacdistr.com/products/airtac-mi25-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125RT FAQ

This double-acting cylinder has a 1/8 inch air port and generates 245.3 N push and 206.1 N pull at 0.5 MPa. At 0.7 MPa, it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa.

No, this specific SKU does not include the -S magnet, so it cannot host CMSG, DMSG or EMSG switches. You must select an MI25X125RT-S variant to enable magnetic sensing. The unit uses fixed TPU bumper pads rather than an adjustable air cushion.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125RT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.