
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X160SCAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial workloads in compact spaces. The riveted barrel and piston rod shrug off mild corrosion, making it superior to painted alternatives in damp or washdown environments. With a 160 mm stroke, it provides ample travel for indexing and lifting tasks.
Equipped with a built-in piston magnet (-S), it supports CMSG, DMSG, and EMSG switches for precise position detection. The CA rear pivot cover allows direct clevis mounting. For real-world sizing, plan for roughly 147 N of usable work at 0.5 MPa, which means it can safely lift about 12.5 kg vertically with a 2:1 safety margin. The 1/8" air port ensures adequate flow for its 30-800 mm/s speed range. Order code MI25X160SCAT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X160SCAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging line, using the 245.3 N push force to redirect heavy cartons onto secondary chutes reliably.
Indexes empty pallets into a stacking frame, leveraging the 160 mm stroke and CA clevis to accommodate angular misalignment during the push cycle.
Ejects processed fluid samples from a testing carousel, where the stainless-steel construction resists chemical exposure and mild washdown.
When sizing this 25 mm bore, compare it against its neighbors: a 20 mm bore yields 157.0 N push at 0.5 MPa, while stepping up to a 32 mm bore provides 402.2 N. If your load drifts when air is lost or the valve is centered, remember the fixed TPU bumper pads only soften the stroke end—they act as a decelerator, never a lock or brake. To hold a vertical load securely, add an external rod lock or a pilot-operated check valve.
The 160 mm stroke is well within the 500 mm maximum, but at full extension be mindful of side-loading and rod-bending forces. Along with the CA clevis back cover, you can utilize LB foot, FA flange, SDB pivot-block, or TC trunnion mounts. The ISO 6432 mounting interface on this Ø25 bore ensures it drops directly into standard mini-cylinder brackets.
AirtacDistr lists every MI25 order code with its price on one page at https://airtacdistr.com/products/airtac-mi25-mini-air-cylinder
Quick checklist
This 25 mm bore cylinder has a 1/8" air port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG, or EMSG electronic switches. It features fixed TPU bumper pads that decelerate the piston at stroke end, but it does not have an adjustable air cushion; for that, look at the MIC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.