verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CMT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X200CMT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke200 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$53.18 $60.68Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CMT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks. The Ø25 mm bore conforms to ISO 6432 mounting dimensions, so it drops directly into standard mini-cylinder brackets and clevises. Its stainless barrel and piston rod resist mild corrosion, giving it a real edge over painted-steel or aluminium alternatives in damp or washdown environments. The rear CM round cover provides a clean, compact finish for simple back-end mounting.

At 0.5 MPa it generates 206.1 N of pull force, and plan for roughly 147 N of actual work to keep a safe margin. That equates to lifting about 12.5 kg vertically, letting you match real part weights easily. Air arrives through a 1/8 inch port, and fixed TPU bumper pads decelerate the piston at both stroke ends. Because this specific SKU lacks the -S magnet, it cannot host CMSG, DMSG or EMSG position switches. Order code MI25X200CMT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CMT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X200CMT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke200 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CMT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CMT Is Used

conveyor_belt

Package Diverter Gate

Pushes light cardboard cartons on a packaging line using 245.3 N of thrust, with the stainless build surviving occasional washdowns.

warehouse

Vertical Parts Lift

Raises lightweight plastic totes weighing up to 12.5 kg through a 200 mm stroke, relying on the CM round end for simple top mounting.

factory

Small Press Ejection

Kicks stamped aluminium parts out of a die zone, where the fixed TPU bumpers absorb the end-of-stroke impact without needing adjustment.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CMT the Right Cylinder?

When sizing this 200 mm stroke actuator, compare it against its neighbours: a Ø20 bore provides 157.0 N of push at 0.5 MPa, while stepping up to a Ø32 yields 402.2 N. This model sits comfortably in the middle for medium-force tasks. Since it lacks a magnet, order an -S variant if your sequence requires CMSG, DMSG or EMSG sensors. You can mount it using LB foot, FA flange, SDB pivot or TC trunnion hardware.

Remember that a plain double-acting cylinder drifts when air is removed or the valve centres, as the fixed TPU pads only soften the stroke-end impact rather than locking the rod. Fit an external rod lock or pilot-operated check valve to hold a suspended load. Furthermore, across a 200 mm extension, minimise side-loading to prevent rod bending and premature seal wear.

AirtacDistr lists every MI25 order code with its price on one page at https://airtacdistr.com/products/airtac-mi25-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CMT FAQ

This double-acting cylinder pushes with 245.3 N and pulls with 206.1 N at 0.5 MPa. At 0.7 MPa, push is 343.4 N and pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa, and the air port is 1/8 inch.

Yes, the Ø25 bore uses the ISO 6432 mounting interface, so it fits standard mini-cylinder clevises and brackets. However, because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG switches; you must select an -S variant for position sensing.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CMT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.