
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X250CMT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 250mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding linear motion tasks with ease. The 25 mm bore pairs a 10 mm piston rod with a 1/8" port, while the 250 mm stroke provides ample extension for packaging and material handling. Its stainless construction resists mild corrosion, offering a distinct advantage over painted alternatives in damp or washdown environments.
Built with fixed TPU bumper pads to decelerate the stroke end, the riveted round body remains compact and light. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For real-world planning, expect a safe working load of roughly 147 N, or the ability to lift about 12.5 kg vertically with a 2:1 safety margin. Order code MI25X250CMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X250CMT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a logistics conveyor to push parcels onto secondary chutes using its 245.3 N push force.
Drives the mechanical arms that fold corrugated box flaps prior to tape sealing, utilizing the 250 mm stroke length.
Extends a physical barrier to halt incoming pallets at a wrapping station, relying on the 12.5 kg vertical lift capacity.
When sizing this 25 mm bore unit, the smaller Ø20 generates 157.0 N of push at 0.5 MPa, whereas the larger Ø32 provides 402.2 N, helping you bracket your force needs. The CM round end back cover dictates the rear port orientation, and standard mounting brackets like LB foot or FA flange fit the ISO 6432 interface. Keep in mind that a plain cylinder drifts if air pressure drops or the valve is centered; the bumper pads only soften the impact, so add an external rod lock or pilot check valve if you need to hold a suspended load. At 250 mm of extension, verify your guiding structure to prevent rod bending under side loads.
AirtacDistr lists every MI25 order code with its price on one page at https://airtacdistr.com/products/airtac-mi25-mini-air-cylinder
Quick checklist
This 25 mm bore cylinder features a 1/8" port and a 10 mm rod. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so CMSG, DMSG, or EMSG switches cannot be used. You would need the -S variant for position sensing. It uses the ISO 6432 mounting interface and fixed TPU bumper pads rather than an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.