verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X250SCAT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X250SCAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 250mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke250 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$60.16 $67.66Save 11% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X250SCAT

Generating 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust linear motion tasks. The 25 mm bore operates on a 1/8" port, and the 250 mm stroke falls well within the 500 mm standard limit for this size. Its riveted stainless barrel and rod resist mild corrosion, making it highly suitable for damp production areas where painted steel alternatives would degrade. The built-in magnet (-S) directly supports CMSG, DMSG, and EMSG position switches.

Because the ISO 6432 mounting interface standard applies to this 25 mm bore, the body drops directly into standard mini-cylinder brackets and clevises without custom machining. Fixed TPU bumper pads absorb the impact at both stroke ends to protect the mechanism. For practical sizing, plan for a safe working load of roughly 147 N, which equates to lifting about 12.5 kg vertically with a 2:1 safety margin. Order code MI25X250SCAT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X250SCAT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X250SCAT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke250 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X250SCAT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X250SCAT Is Used

conveyor_belt

Package Diverting Gate

Actuates a routing flap on a logistics sorting line, using the 245.3 N push force to redirect heavy cartons at high speed.

package_2

Vertical Flap Folding

Drives a cardboard flap-folding arm on a packaging machine, safely lifting parts weighing up to 12.5 kg through its 250 mm travel.

factory

Washdown Component Ejection

Pushes machined stainless parts out of a damp machining cell, relying on the cylinder's own stainless barrel to resist mild corrosion.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X250SCAT the Right Cylinder?

When sizing this 25 mm bore, stepping down to a 20 mm cylinder drops the 0.5 MPa push force to 157.0 N, while moving up to a 32 mm bore increases it significantly to 402.2 N. The CA back cover provides an integrated pivot clevis for articulated rod-end loads, which is essential for accommodating the side-load geometry often introduced by a 250 mm stroke. Always verify that your rod-end alignment prevents excessive bending moments over this extended travel distance.

This SKU includes the -S piston magnet for CMSG, DMSG, or EMSG electronic and reed sensors. Remember that fixed TPU bumpers only decelerate the stroke end; they do not function as an adjustable air cushion. Furthermore, if air pressure drops or the directional valve centres, the piston will drift and cannot hold a suspended load—install an external pilot-operated check valve or rod lock if static holding is required.

AirtacDistr lists every MI25 order code with its price on one page at https://airtacdistr.com/products/airtac-mi25-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X250SCAT FAQ

This 25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.

No, the piston will drift if air is lost or the valve is centred; you need an external rod lock or pilot check valve for holding. The cylinder uses fixed TPU bumper pads to decelerate at stroke ends, not an adjustable air cushion. The -S suffix denotes a built-in magnet for CMSG/DMSG/EMSG sensors, and the CA suffix indicates a rear pivot clevis.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X250SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.