verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40CAT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X40CAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 40mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke40 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$39.26 $46.76Save 16% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40CAT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work in a compact footprint. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Its riveted stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. Because it follows ISO 6432 mounting dimensions, it drops directly into standard mini-cylinder brackets and clevises.

For practical sizing, plan for about 147 N of real work at 0.5 MPa, which means it lifts roughly 12.5 kg vertically with a 2:1 safety margin. The rear CA pivot cover suits articulated rod-end linkages. Fixed TPU bumper pads absorb stroke-end impact, though this SKU lacks a magnet and cannot host CMSG, DMSG or EMSG sensors. Order code MI25X40CAT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40CAT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X40CAT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke40 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40CAT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×40Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40CAT Is Used

conveyor_belt

Pivot Diverter Gate

Leverages the CA rear clevis to swing a heavy sorting flap on a packaging line, utilising the 245.3 N push force to deflect parcels reliably.

factory

Washdown Clamp

Holds stainless-steel fixtures in a food-grade washdown bay, where the riveted stainless barrel shrugs off mild moisture and cleaning spray.

warehouse

Pallet Stopper Arm

Extends 40 mm to halt pallets on a gravity roller conveyor, absorbing the impact via fixed TPU pads instead of transferring shock to the frame.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40CAT the Right Cylinder?

When sizing this 245.3 N (0.5 MPa) unit, the smaller Ø20 bore provides 157.0 N, while the larger Ø32 bore offers 402.2 N if your payload demands more push. The 40 mm stroke is short and highly resistant to rod buckling, but if you scale up the travel toward the 500 mm maximum, ensure a front pivot or guide to prevent side-loading damage. This CA clevis model articulates naturally to absorb misalignment.

Remember that venting the air supply causes the piston to drift, as the TPU bumpers only decelerate the end of stroke and act as neither a lock nor a brake. To suspend a vertical load safely during an air loss event, fit an external rod lock or a pilot-operated check valve. Additionally, because this specific SKU lacks the -S magnet, position sensing is impossible without upgrading to the magnet-equipped variant.

AirtacDistr lists every MI25 order code with its price on one page at https://airtacdistr.com/products/airtac-mi25-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40CAT FAQ

At 0.5 MPa it pushes 245.3 N and pulls 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. Air connects via a 1/8" port, and the piston rod is Ø10 mm with an M10x1.25 male thread.

Yes, the Ø25 bore adheres to ISO 6432 mounting dimensions, so it fits standard mini-cylinder clevises and brackets. However, this specific SKU has no internal magnet, meaning it cannot accept CMSG, DMSG or EMSG magnetic switches; you would need the -S variant for position sensing.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40CAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.