verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40SCMT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X40SCMT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 40mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke40 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$41.69 $49.19Save 15% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40SCMT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks. The Ø25 bore uses a 1/8" port and an M10x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted-steel or aluminium minis in damp, food or outdoor environments. Built with fixed TPU bumper pads to decelerate the stroke end, the riveted construction remains compact and light.

Because the code includes an S, this unit features a built-in piston magnet for CMSG, DMSG or EMSG switches. For actual work at 0.5 MPa, plan for roughly 147 N of usable load rather than the absolute maximum rating. In vertical lifting scenarios, this translates to safely hoisting about 12.5 kg with a 2:1 margin. The CM round end back cover provides a clean rear profile for tight installations. Order code MI25X40SCMT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40SCMT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X40SCMT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke40 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40SCMT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×40Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40SCMT Is Used

conveyor_belt

Package Diverting Gate

Uses the 245.3 N push force at 0.5 MPa to reliably pivot a sorting gate arm, redirecting medium-weight cartons on a packaging line.

vertical_align_bottom

Vertical Parts Lifter

Lifts small stainless-steel fixtures weighing up to 12.5 kg in a washdown assembly cell, relying on the corrosion-resistant barrel.

warehouse

Pallet Stopper Arm

Extends 40 mm to block incoming pallets at a packaging station, using the CM round end to fit neatly into the conveyor frame.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40SCMT the Right Cylinder?

Sizing this actuator requires looking both ways: stepping down to the Ø20 bore drops the 0.5 MPa push force to 157.0 N, while upgrading to the Ø32 bore raises it to 402.2 N. This Ø25 model strikes a strong balance for medium-duty handling. It uses the ISO 6432 mini-cylinder mounting interface, so it drops directly into standard brackets and clevises. You can also utilise LB foot, FA flange, SDB pivot or TC trunnion mounts.

Remember that a plain cylinder drifts when air is lost or the valve is centred, as the TPU bumpers only soften the stroke end rather than acting as a brake. To hold a load securely, integrate an external rod lock or a pilot-operated check valve. With a 40 mm stroke, side-load and rod-bending stress remain minimal, but ensure the front mounting keeps the rod aligned for smooth operation.

AirtacDistr lists every MI25 order code with its price on one page at https://airtacdistr.com/products/airtac-mi25-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40SCMT FAQ

This double-acting cylinder features a 1/8" air port. At 0.5 MPa it provides 245.3 N push and 206.1 N pull force. At 0.7 MPa it delivers 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa.

Yes, the S in the model code denotes a built-in piston magnet, allowing you to mount CMSG, DMSG or EMSG electronic or reed switches directly to the body. For impact absorption, it relies on fixed TPU bumper pads that decelerate the piston at the stroke end; it does not feature an adjustable air cushion.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40SCMT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.