
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X50SCAFAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 50mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks. The riveted construction uses a stainless barrel and rod, resisting mild corrosion in damp or washdown environments better than painted alternatives. Because this 25 mm bore carries the -S suffix, it includes a piston magnet for direct mounting of CMSG, DMSG, or EMSG sensors.
The 50 mm stroke operates at 30-800 mm/s, relying on fixed TPU bumper pads to soften end-of-stroke impact. It features a 1/8" port and an M10x1.25 male rod thread. For practical sizing, plan for about 147 N of real work at 0.5 MPa, which means it lifts roughly 12.5 kg vertically with a 2:1 safety margin. Order code MI25X50SCAFAT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X50SCAFAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging line, using the 245.3 N thrust to push heavy cartons onto secondary tracks at high cycling speeds.
Ejects finished aluminium parts from a machining fixture, where the stainless build prevents coolant mist from degrading the barrel.
Deploys a 50 mm stroke stop block to halt incoming pallets on a roller conveyor, absorbing the impact via fixed TPU bumper pads.
This 25 mm bore sits between the 20 mm option (157 N push @0.5 MPa) and the larger 32 mm size (402.2 N push @0.5 MPa). If your payload is lighter, the 20 mm saves space, but for loads approaching 12 kg, this model provides the necessary thrust. The included CA rear clevis and FA flange allow versatile pivot or fixed mounting setups.
Remember that a standard double-acting cylinder drifts when air pressure drops or the valve centers, as the TPU bumpers only decelerate the stroke and act as no brake. To suspend a vertical load safely during an air loss event, integrate an external rod lock or a pilot-operated check valve into your circuit.
AirtacDistr lists every MI25 order code with its price on one page at https://airtacdistr.com/products/airtac-mi25-mini-air-cylinder
Quick checklist
This 25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
Yes, the 25 mm bore uses the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises. The -S suffix denotes a built-in magnet, allowing you to mount CMSG, DMSG, or EMSG reed or electronic switches directly onto the body for position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.