verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75RT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X75RT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke75 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$41.69 $49.19Save 15% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75RT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust linear motion tasks. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread, while the rear R cover features an axial-in port orientation to simplify plumbing in tight layouts. Its riveted stainless barrel and rod naturally resist mild corrosion, offering a genuine advantage over painted alternatives in damp or washdown environments.

Because it conforms to ISO 6432 mounting dimensions, the body drops directly into standard mini-cylinder brackets and clevises. Plan for a safe working load of roughly 147 N (about 60% of the 0.5 MPa rating) to account for friction, or expect it to lift about 12.5 kg vertically with a 2:1 safety margin. Fixed TPU bumper pads absorb the stroke-end impact, and since this specific SKU lacks the -S magnet, it cannot host CMSG, DMSG or EMSG reed switches. Order code MI25X75RT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75RT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X75RT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke75 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75RT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×75Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75RT Is Used

conveyor_belt

Package Diverter Gate

Actuates a routing flap on a packaging line, using the 245.3 N push force to deflect medium-weight cartons at high speed without buckling.

warehouse

Pallet Stopping Arm

Deploys the 75 mm stroke to halt pallets at a strapping station, where the stainless build withstands occasional dust and moisture.

precision_manufacturing

Press Ejector Mechanism

Kicks stamped metal parts out of a small press bed, relying on the rear R axial port to keep air lines clear of the tooling.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75RT the Right Cylinder?

When sizing this 245.3 N (at 0.5 MPa) unit, step down to a Ø20 bore if your application only requires 157.0 N of push force, or move up to a Ø32 bore for 402.2 N when heavier payloads are involved. The 75 mm stroke sits well within the 500 mm maximum, keeping rod bending stress low. If your mechanism must maintain its vertical position during an air loss or valve centre state, note that the piston will drift; the TPU pads only decelerate the end of travel and act as neither a brake nor a lock. You must fit an external rod lock or a pilot-operated check valve for secure load holding. To add position sensing, select the -S magnet version instead, as this base configuration cannot accept a sensor.

AirtacDistr lists every MI25 order code with its price on one page at https://airtacdistr.com/products/airtac-mi25-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75RT FAQ

At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it yields 343.4 N push and 288.5 N pull, with a theoretical maximum of 50 kgf at 1.0 MPa. The air port is 1/8" and the male rod thread is M10x1.25.

Yes, the Ø25 bore uses the ISO 6432 mounting interface for easy bracket compatibility. However, this specific SKU lacks a magnet, so it cannot accept CMSG, DMSG or EMSG switches; you must order the -S variant for position sensing.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75RT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.