
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X200UT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial work within a compact riveted stainless-steel format. The 32 mm bore pairs a 12 mm rod with a 1/4" port to cycle a 200 mm stroke at speeds between 30 and 800 mm/s. Its stainless barrel and piston rod naturally resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. Because this is a larger non-ISO-6432 size, it is specified purely as a round-body unit rather than dropping into standard mini-cylinder brackets.
Fixed TPU bumper pads absorb the impact at each stroke end, decelerating the piston without offering adjustable cushioning. For actual work planning, expect a safe output of roughly 241 N at 0.5 MPa, which translates to lifting about 20.5 kg vertically with a 2:1 safety margin. This specific SKU lacks the -S magnet, so it cannot host CMSG, DMSG or EMSG reed switches; sensing requires ordering the magnet-equipped variant instead. Order code MI32X200UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X200UT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy cartons onto auxiliary lanes with 402.2 N of force at 0.5 MPa, utilizing the 200 mm stroke to clear the main conveyor belt entirely.
Maintains consistent tension on industrial fabric rolls during high-speed weaving, relying on the stainless construction to endure humid manufacturing environments.
Cycles a 90-degree routing gate via the U-style back cover, using its 345.6 N pull force at 0.5 MPa to swing heavy pneumatic diverters out of the path.
When sizing this 32 mm bore, stepping down to the 25 mm model drops the 0.5 MPa push force to 245.3 N, while stepping up to the 40 mm bore increases it to 628.3 N. The U-style back cover orients the rear port 90 degrees to the body, which helps route hoses cleanly in tight machinery. Remember that a standard double-acting cylinder drifts if air pressure drops or the valve is centred—the TPU bumpers only soften the end of travel and act as neither a brake nor a position lock. To suspend a load safely mid-stroke, fit an external pilot-operated check valve or a dedicated rod lock. The 200 mm stroke is well within the 500 mm maximum for this bore, though maintaining rod alignment is critical to prevent side-load bending over that travel distance.
AirtacDistr lists every MI32 order code with its price on one page at https://airtacdistr.com/products/airtac-mi32-mini-air-cylinder
Quick checklist
This 32 mm bore cylinder features a 1/4" port and a 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so CMSG, DMSG or EMSG switches cannot be used. You must select the -S variant of this round-body cylinder to enable magnetic sensing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.