verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450RT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X450RT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 450mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ32 mm
  • Stroke450 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$107.61 $115.11Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI32 stroke, mounting and version on one page All MI32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450RT

Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial work. The stainless-steel barrel and piston rod resist mild corrosion and washdown, outperforming painted alternatives in damp environments. Its riveted construction keeps the unit compact while fixed TPU bumper pads absorb stroke-end impact. Equipped with a 1/4 inch port and an R axial-in rear cover, it integrates cleanly into pneumatic setups.

For practical sizing, plan for roughly 241 N of real work at 0.5 MPa, which safely lifts about 20.5 kg vertically with a 2:1 margin. The 450 mm stroke falls within the 500 mm standard limit, providing extended reach without requiring a custom order. Note that because this SKU lacks a magnet, it cannot accept CMSG, DMSG or EMSG sensors; you would need the -S variant for position detection. Order code MI32X450RT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450RT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI32X450RT
SeriesMI mini cylinder
Bore sizeØ32 mm
Stroke450 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N484 N
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450RT

MIround-body mini cylinder (double-acting).
32Bore size in mm.
×450Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450RT Is Used

conveyor_belt

Package Diverting Gate

Actuates a heavy routing flap on a logistics conveyor, using the 402.2 N thrust to push parcels firmly onto secondary sorting belts.

warehouse

Pallet Stacking Pusher

Extends 450 mm to index empty pallets into a stacking cradle, taking advantage of the long stroke and 20.5 kg safe vertical lift capacity.

factory

Textile Loom Tensioner

Maintains heavy fabric tension across a wide loom bed, relying on the stainless-steel rod to withstand humid manufacturing conditions.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450RT the Right Cylinder?

When sizing this 32 mm bore, the adjacent 25 mm option yields 245.3 N push, while the larger 40 mm provides 628.3 N at 0.5 MPa, allowing you to step up or down based on exact load requirements. If your application needs position feedback, select an -S model to enable magnetic switches. The R back cover provides an axial-in port orientation for tight mounting spaces.

Remember that a standard cylinder drifts when air is lost or the valve is centered, as the fixed TPU pads only decelerate the stroke end rather than locking the rod. To suspend a load safely, install an external rod lock or a pilot-operated check valve. Additionally, the 450 mm stroke demands careful alignment to prevent rod bending and premature seal wear from side loads.

AirtacDistr lists every MI32 order code with its price on one page at https://airtacdistr.com/products/airtac-mi32-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450RT FAQ

This 32 mm bore cylinder features a 1/4 inch port and a 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.

No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG switches. You must select the -S variant to enable position sensing. It uses fixed TPU bumper pads for deceleration, not an adjustable air cushion.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450RT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.