
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X450UT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 450mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial work. The stainless-steel barrel and piston rod resist mild corrosion and washdowns better than painted alternatives. Its riveted construction remains compact, while fixed TPU bumper pads absorb stroke-end impacts. The U-type back cover provides a 90-degree port orientation for tight layouts.
At 0.5 MPa, plan for roughly 241 N of actual work, which translates to lifting about 20.5 kg vertically with a 2:1 safety margin. Air routes through a 1/4" port, and the 450 mm stroke falls within the 500 mm standard limit. Because this SKU lacks a magnet, it cannot accept CMSG, DMSG, or EMSG sensors without upgrading to an -S variant. Order code MI32X450UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450UT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a heavy routing flap on a packaging line, using the 450 mm stroke to shift parcels between parallel belts.
Pushes a light press head downward to seat bearings, relying on the 402.2 N thrust to overcome insertion resistance.
Extends a 450 mm barrier to halt pallets at a wrapping station, absorbing the impact with fixed TPU bumper pads.
When sizing this 32 mm bore, verify your actual load against the 241 N safe working figure. If you need less force, the 25 mm bore offers 245.3 N push at 0.5 MPa; for heavier demands, the 40 mm bore provides 628.3 N. The 450 mm stroke requires careful alignment to prevent rod bending under side loads. Remember that venting air or centering the valve causes the piston to drift, as the TPU bumpers only decelerate the end of travel rather than locking the load. Use a pilot-operated check valve or external rod lock for strict position holding. Without the -S suffix, magnetic switches cannot be mounted.
AirtacDistr lists every MI32 order code with its price on one page at https://airtacdistr.com/products/airtac-mi32-mini-air-cylinder
Quick checklist
This 32 mm bore cylinder features a 1/4" port and a 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU lacks the internal magnet required for sensing. To use CMSG, DMSG, or EMSG switches, you must select the -S variant. Additionally, the fixed TPU bumpers only decelerate the stroke end and do not function as an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.