
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X80CMT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty actuation with an 80 mm stroke. The stainless-steel barrel and piston rod resist mild corrosion and washdowns, outperforming painted alternatives in damp environments. It features a CM round rear cover and a 1/4" air port.
Because fixed TPU bumper pads only decelerate the stroke end rather than acting as an adjustable cushion, you should plan for a safe working load of roughly 241 N. This translates to lifting about 20.5 kg vertically with a 2:1 safety margin, letting you match real part weights accurately. Order code MI32X80CMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X80CMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 402.2 N thrust to deflect heavy cartons on a logistics sorting line, where the stainless build survives dusty and humid warehouse conditions.
Secures steel workpieces in a machining fixture, leveraging the 20.5 kg vertical lift capacity to hold parts firmly during milling operations.
Folds corrugated cardboard flaps on a continuous packaging machine, relying on the CM round end cover for straightforward rear pivot mounting.
When sizing this Ø32 bore, the smaller Ø25 yields 245.3 N of push at 0.5 MPa, while the larger Ø40 provides 628.3 N, giving you clear scaling steps for your force requirements. The 1/4" port and M10x1.25 male rod thread are fixed by the bore size. Since this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors; specify the -S variant if you require position detection.
Remember that a plain cylinder drifts when air is lost or the valve is centered, as the TPU bumpers only soften impact and do not function as a brake. For secure load holding, integrate an external rod lock or a pilot-operated check valve. The 80 mm stroke is well within standard limits, keeping rod-bending side loads minimal.
AirtacDistr lists every MI32 order code with its price on one page at https://airtacdistr.com/products/airtac-mi32-mini-air-cylinder
Quick checklist
This double-acting cylinder features a 1/4" air port and generates 402.2 N push / 345.6 N pull at 0.5 MPa, and 563 N push / 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so CMSG, DMSG, or EMSG switches cannot be used. You must select the -S variant for position sensing. It uses fixed TPU bumper pads rather than an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.