verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X125SUTCT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X125SUTCT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 125mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ40 mm
  • Stroke125 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionFixed TPU bumper pads
$98.27 $105.77Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI40 stroke, mounting and version on one page All MI40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X125SUTCT

Delivering a robust 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty automation tasks. The Ø40 bore operates with a 1/4" port and a 16 mm piston rod. Its stainless-steel barrel and rod resist mild corrosion, making it highly suitable for damp or washdown environments where painted steel alternatives fail. Fixed TPU bumper pads absorb the impact at stroke extremes, decelerating the piston smoothly without the need for adjustable cushioning.

Because the 628.3 N rating represents an ideal maximum, you should plan for a safe working load of roughly 377 N to account for friction and pressure drops in real setups. For vertical lifting, that translates to hoisting about 32 kg safely with a 2:1 margin. The built-in magnet (-S) directly supports CMSG, DMSG and EMSG position switches, while the U rear cover provides a 90-degree port orientation. This specific configuration also includes a TC trunnion mount for pivoting articulation. Order code MI40X125SUTCT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X125SUTCT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI40X125SUTCT
SeriesMI mini cylinder
Bore sizeØ40 mm
Stroke125 mm
Acting typeDouble acting
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N739 N
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI40X125SUTCT

MIround-body mini cylinder (double-acting).
40Bore size in mm.
×125Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X125SUTCT Is Used

conveyor_belt

Heavy Package Diversion

Pushes heavy cartons weighing up to 32 kg onto secondary packaging lines, utilizing the full 628.3 N thrust at 0.5 MPa without risking frame damage.

vertical_align_bottom

Pneumatic Pressing Station

Applies steady downward clamping pressure for assembling bearings or pins, relying on the TC trunnion to accommodate slight misalignments during the stroke.

science

Washdown Sorting Gate

Actuates stainless-steel routing gates in damp food-processing zones, where the corrosion-resistant barrel survives frequent moisture exposure better than standard models.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X125SUTCT the Right Cylinder?

When sizing this Ø40 actuator, evaluate your force margins carefully. If your application requires less push, stepping down to the Ø32 bore provides 402.2 N at 0.5 MPa, which may save space and air consumption. Since Ø40 is the largest available bore in this series, moving up in force would require switching to an entirely different cylinder family. The 125 mm stroke is well within the 500 mm maximum standard limit, keeping the rod bending risk low, though side loads should still be minimized through proper guiding.

The TC trunnion mount pairs with the U back cover to support articulated or pivoting loads. Remember that the fixed TPU bumpers only soften the end-of-stroke impact; they do not function as a brake. If your system loses air or the valve is centered, the piston will drift, so you must add an external rod lock or a pilot-operated check valve to hold a suspended load securely in place.

AirtacDistr lists every MI40 order code with its price on one page at https://airtacdistr.com/products/airtac-mi40-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X125SUTCT FAQ

This double-acting cylinder features a 1/4" port and a 16 mm rod. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push and 738.9 N pull at 0.7 MPa, with a theoretical maximum force of 128.1 kgf at 1.0 MPa.

Yes to sensors, no to adjustable cushions. The -S suffix denotes a built-in magnet for CMSG, DMSG or EMSG switches. For deceleration, it relies on fixed TPU bumper pads rather than adjustable air cushioning; if you need variable cushioning, look at the MIC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI40X125SUTCT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.