
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X150UT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 150mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty positioning tasks. The stainless-steel barrel and Ø16 mm piston rod resist mild corrosion and washdown, outperforming painted alternatives in damp environments. Riveted construction keeps the unit compact, while fixed TPU bumper pads absorb impact energy at the stroke ends. Because this specific SKU lacks the -S magnet option, it cannot accept CMSG, DMSG, or EMSG position switches.
With a 150 mm stroke and a 1/4 inch air port, the actuator operates at speeds between 30-800 mm/s. For practical sizing, plan for a safe working load of about 377 N, which represents roughly sixty percent of the 0.5 MPa push rating. In a vertical lift scenario, this translates to hoisting approximately 32 kg safely with a 2:1 margin. The U-style back cover provides a 90-degree mounting interface, optimizing spatial layout in tight machine cells. Order code MI40X150UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X150UT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy metal blanks into a progressive die using 628.3 N of thrust at 0.5 MPa, relying on the U-style rear cover for stable 90-degree mounting.
Lowers 32 kg machined components down a 150 mm descent path, utilizing the stainless steel rod for reliable operation in coolant-misted environments.
Actuates a heavy routing gate on a packaging conveyor, where the fixed TPU bumper pads absorb the repetitive kinetic impact of stroke completion.
When sizing this 40 mm bore actuator, compare its 628.3 N push force at 0.5 MPa against the adjacent Ø32 bore, which yields 402.2 N. Since Ø40 is the largest available round-body mini cylinder in this series, there is no larger standard option; moving higher in force requires switching to a different profile family. The 150 mm stroke is well within the 500 mm maximum, keeping rod-bending side-load risks manageable, though external guide rails are still recommended for heavy off-center loads.
Remember that venting or centering the directional valve causes the piston to drift, as the fixed TPU bumpers only decelerate the end-of-stroke impact and act as neither a brake nor a position lock. To suspend a load safely during air loss, integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit. Furthermore, without the -S magnet, electronic position sensing is unsupported on this unit.
AirtacDistr lists every MI40 order code with its price on one page at https://airtacdistr.com/products/airtac-mi40-mini-air-cylinder
Quick checklist
This 40 mm bore cylinder features a 1/4 inch air port and a male M12x1.25 rod thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push and 738.9 N pull at 0.7 MPa, with a theoretical maximum force of 128.1 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, meaning it cannot support CMSG, DMSG, or EMSG switches. You would need the -S variant for electronic position sensing, or use external mechanical limit switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.