verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200CMT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X200CMT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 200mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ40 mm
  • Stroke200 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionFixed TPU bumper pads
$90.08 $97.58Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI40 stroke, mounting and version on one page All MI40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200CMT

Delivering 628.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding actuation tasks. The Ø40 bore operates with a 1/4" port and a 200 mm stroke, utilizing a CM round end rear cover. Because this is a non-ISO-6432 size, it functions purely as a robust round-body actuator rather than a standard mini interface.

The stainless-steel barrel and rod resist mild corrosion and washdown, outperforming painted alternatives in damp environments. Fixed TPU bumper pads absorb stroke-end impacts to protect the mechanism. Since this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For practical sizing, plan for a safe working load of about 377 N, which comfortably lifts a 32 kg part vertically with a 2:1 safety margin. Order code MI40X200CMT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200CMT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI40X200CMT
SeriesMI mini cylinder
Bore sizeØ40 mm
Stroke200 mm
Acting typeDouble acting
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N739 N
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200CMT

MIround-body mini cylinder (double-acting).
40Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200CMT Is Used

conveyor_belt

Heavy Carton Diversion

Pushes heavy corrugated cartons across a packaging line using the full 628.3 N push force available at 0.5 MPa.

warehouse

Pallet Component Indexing

Shifts dense metal sub-assemblies into a staging area, leveraging the 32 kg safe vertical lift equivalence.

factory

Stamping Ejector

Ejects formed aluminium parts from a press bed, relying on the fixed TPU bumpers to absorb the end-of-stroke impact.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200CMT the Right Cylinder?

Sizing this 40 mm bore against its neighbours is straightforward: it provides 628.3 N push at 0.5 MPa, sitting directly above the Ø32 bore that yields 402.2 N. As the largest available MI bore, it represents the top end of the range for heavy pushing. If your application requires position feedback, you must select the -S magnet variant to enable sensor mounting.

Keep in mind that a plain double-acting cylinder drifts when air is lost or the valve is centered, as the TPU bumpers only decelerate the stroke end without acting as a brake. To suspend a load safely, install an external rod lock or a pilot-operated check valve. With a 200 mm stroke, ensure adequate side-load support to prevent rod bending and premature seal wear.

AirtacDistr lists every MI40 order code with its price on one page at https://airtacdistr.com/products/airtac-mi40-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200CMT FAQ

This 40 mm bore cylinder features a 1/4" port and a 200 mm stroke. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push and 738.9 N pull at 0.7 MPa, with a theoretical maximum of 128.1 kgf at 1.0 MPa.

No, this specific SKU lacks the internal magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must order the -S variant for position sensing. The unit uses fixed TPU bumper pads for deceleration rather than an adjustable air cushion.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200CMT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.