
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X200SRT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 200mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty automation tasks. The stainless-steel barrel and Ø16 rod resist mild corrosion and washdown, outperforming painted alternatives in damp environments. Its riveted construction keeps the unit compact while fixed TPU bumper pads absorb stroke-end impact.
Featuring a 200 mm stroke and a 1/4" air port, it provides a safe working load of roughly 377 N for real-world tasks. This translates to lifting about 32 kg vertically with a 2:1 safety margin. The built-in -S magnet supports CMSG, DMSG and EMSG switches for position sensing. Order code MI40X200SRT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200SRT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy metal blanks into a stamping press using its 628.3 N output, relying on the 200 mm stroke to clear the feed mechanism completely.
Lowers empty pallets onto a conveyor chain, using the safe vertical lift capacity of roughly 32 kg to handle the weight securely.
Diverts dense industrial cartons on a sorting line, where the stainless build withstands occasional washdowns and the 1/4" port ensures rapid actuation.
When sizing this 40 mm bore, compare its 628.3 N push force at 0.5 MPa against the smaller Ø32 bore, which yields 402.2 N. As the largest available MI size, there is no larger standard bore to step up to. For high-speed cycling, consider the MIC variant which offers adjustable air cushioning instead of the fixed TPU bumpers found here.
The R axial-in rear cover port keeps plumbing neatly in line. Because a standard cylinder vents and drifts when air is lost or the valve centers, add an external rod lock or pilot check valve if your application must hold a vertical load safely in place.
AirtacDistr lists every MI40 order code with its price on one page at https://airtacdistr.com/products/airtac-mi40-mini-air-cylinder
Quick checklist
This double-acting cylinder pushes with 628.3 N and pulls with 527.8 N at 0.5 MPa. At 0.7 MPa, push is 879.6 N and pull is 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa. It uses a 1/4" air port and a male M12x1.25 rod thread.
No, the fixed TPU bumper pads only decelerate the stroke end; they do not lock the piston. The cylinder will drift if air is lost or the valve is centered, so use an external rod lock for suspended loads. The built-in -S magnet allows CMSG, DMSG and EMSG switches to detect position.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.