verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200UT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X200UT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 200mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ40 mm
  • Stroke200 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionFixed TPU bumper pads
$90.08 $97.58Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI40 stroke, mounting and version on one page All MI40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200UT

Delivering 628.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles heavy-duty actuation where smaller bores stall. The Ø40 mm barrel and Ø16 mm piston rod are rolled and riveted, shrugging off mild corrosion and washdown better than painted alternatives. It breathes through a 1/4" port and relies on fixed TPU bumper pads to decelerate the stroke end without adjustable cushioning.

For practical sizing, plan for a safe working load of about 377 N, which lets you lift roughly 32 kg vertically with a 2:1 safety margin. The U back cover provides a 90-degree port and mounting orientation for tight machine layouts. Note this SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors; choose the -S variant if you need position feedback. Order code MI40X200UT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200UT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI40X200UT
SeriesMI mini cylinder
Bore sizeØ40 mm
Stroke200 mm
Acting typeDouble acting
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N739 N
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200UT

MIround-body mini cylinder (double-acting).
40Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200UT Is Used

precision_manufacturing

Stamping Press Ejection

Uses the 628.3 N push force to knock heavy stamped metal panels out of a die, relying on the stainless body to endure coolant splash.

vertical_align_bottom

Vertical Parts Lowering

Lowers 30 kg automotive castings from an overhead conveyor, staying within the 32 kg safe vertical lift limit at 0.5 MPa.

conveyor_belt

Pallet Diverter Gate

Swings a heavy lane diverter on a packaging line, with the 90-degree U cover allowing a compact side-mounted pivot joint.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200UT the Right Cylinder?

When sizing this 200 mm stroke actuator, compare it against its neighbours: the Ø32 bore yields 402.2 N of push at 0.5 MPa, while the Ø40 hits 628.3 N, making the latter necessary for heavier jigs. Since this is the largest standard round-body mini cylinder in the family, moving beyond 628.3 N requires switching to a different profile series entirely. The 200 mm travel is well within the 500 mm maximum, though at full extension you should watch for rod-bending side loads.

The U-type rear cover simplifies 90-degree mounting, but remember that air pressure alone does not secure the load. If the valve centres or supply drops, the piston drifts; the TPU bumpers only soften the end-of-stroke impact. Fit an external rod lock or pilot-operated check valve to hold a suspended weight safely.

AirtacDistr lists every MI40 order code with its price on one page at https://airtacdistr.com/products/airtac-mi40-mini-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200UT FAQ

At 0.5 MPa it pushes 628.3 N and pulls 527.8 N. At 0.7 MPa it pushes 879.6 N and pulls 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa. Air is supplied through a 1/4" port, and the male rod thread is M12x1.25.

No, this specific SKU lacks a piston magnet, so CMSG, DMSG and EMSG switches will not function. You must select the -S magnet variant for position sensing. It uses fixed TPU bumper pads for end-of-stroke deceleration rather than an adjustable air cushion.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200UT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.