
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X500CMT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty linear motion across its 500 mm travel. The stainless-steel barrel and Ø16 mm piston rod shrug off mild corrosion, making it superior to painted alternatives in damp or washdown environments. It features a CM round end cover and a 1/4" port.
Because the rated output exceeds typical real-world friction, plan for a safe working load of roughly 377 N. This translates to lifting about 32 kg vertically with a 2:1 safety margin. Fixed TPU bumper pads absorb stroke-end impact, and since this specific SKU lacks the -S magnet, it cannot host CMSG, DMSG, or EMSG sensors without upgrading to a magnetized variant. Order code MI40X500CMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500CMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Provides the 628.3 N push at 0.5 MPa needed to swing heavy pallet diversion gates on high-throughput packaging lines.
Lifts loaded tote boxes weighing up to 32 kg across a 500 mm vertical span, utilizing its full stroke length safely.
Ejects formed metal parts from heavy stamping presses, relying on the stainless construction to endure harsh industrial environments.
Sizing this 40 mm bore requires looking at the adjacent options. Dropping to a 32 mm bore reduces the 0.5 MPa push force to 402.2 N, while 40 mm is the largest available MI round-body size, so moving up requires a different cylinder family entirely. The CM round end cover dictates your rear mounting and port orientation, so verify it fits your bracketry.
With a long 500 mm stroke, minimize side loading to prevent rod bending and premature seal wear. Furthermore, this standard double-acting cylinder drifts when air is lost or the valve is centered, as the TPU pads only decelerate the stroke end rather than locking the load. To hold a suspended weight securely, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
AirtacDistr lists every MI40 order code with its price on one page at https://airtacdistr.com/products/airtac-mi40-mini-air-cylinder
Quick checklist
At 0.5 MPa it provides 628.3 N push and 527.8 N pull. At 0.7 MPa it provides 879.6 N push and 738.9 N pull. The theoretical maximum force is 128.1 kgf at 1.0 MPa. The air port size is 1/4".
No, this specific SKU does not include the -S magnet, so it cannot host CMSG, DMSG, or EMSG magnetic switches. You must select an -S variant for position sensing. It uses fixed TPU bumper pads for deceleration, not an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.