
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X60CMTCT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this AirTAC MI40X60CMTCT is a heavy-duty round-body mini cylinder built for demanding pneumatic tasks. It features a stainless-steel barrel and piston rod that shrug off mild corrosion, making it far superior to painted alternatives in damp or washdown environments. The 60 mm stroke operates at speeds between 30 and 800 mm/s, fed by a 1/4 inch air port.
Because it lacks an internal magnet, this specific SKU cannot host CMSG, DMSG or EMSG reed switches. Fixed TPU bumper pads absorb the impact at stroke extremes, though they decelerate rather than actively cushion the load. For practical sizing, plan for a real work rate of roughly 377 N, which equates to safely lifting a 32 kg mass vertically with a 2:1 safety margin. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X60CMTCT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 628.3 N push force to knock stamped metal blanks out of a die, where the stainless construction resists cutting fluid splashes.
Employs the TC trunnion mount to pivot a heavy-duty deflector gate, routing dense cartons along a 60 mm stroke at high cycle rates.
Leverages the 32 kg safe vertical lift equivalent to shove heavy assemblies off a roller conveyor onto an outbound pallet station.
Choosing this Ø40 bore means you need serious thrust, stepping up from the Ø32 class that tops out at 402.2 N push at 0.5 MPa. As the largest in the MI family, there is no larger standard bore to scale into. The integrated TC trunnion mount pairs with the CM round rear cover to handle pivoting loads smoothly.
Remember that a standard double-acting cylinder drifts if air pressure drops or the valve is centred, as the TPU bumpers only soften the end-of-stroke impact rather than locking the rod. To suspend a load safely mid-stroke, you must fit an external rod lock or a pilot-operated check valve. Additionally, without the -S magnet option, position sensing is impossible on this unit.
AirtacDistr lists every MI40 order code with its price on one page at https://airtacdistr.com/products/airtac-mi40-mini-air-cylinder
Quick checklist
This Ø40 mm bore cylinder features a 1/4 inch air port and a male M12x1.25 rod thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, increasing to 879.6 N push and 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
No, this specific SKU does not include a piston magnet, so CMSG, DMSG or EMSG switches cannot be used. You would need the -S variant for sensing. Furthermore, the fixed TPU bumper pads only decelerate the stroke end; they are not an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.