
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X60SCMT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles heavy-duty actuation within a compact 60 mm stroke. The Ø40 mm bore operates on a 1/4" port with a robust Ø16 mm piston rod, while fixed TPU bumper pads absorb the impact at stroke extremes. Because the barrel and rod are stainless, the riveted construction resists mild corrosion better than painted alternatives in damp or washdown environments.
For practical sizing, plan for a safe working load of roughly 377 N, which is about 60 percent of the 0.5 MPa push rating. This translates to lifting a 32 kg mass vertically when applying a 2:1 safety margin. The built-in piston magnet (-S) supports CMSG, DMSG and EMSG switches for position sensing, and the CM round rear cover provides a clean, versatile mounting footprint for tight machinery. Order code MI40X60SCMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X60SCMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 628.3 N push force at 0.5 MPa to knock heavy stamped metal parts out of a die, leveraging the 60 mm stroke for rapid retraction.
Pushes loaded pallets sideways on a packaging line, where the stainless steel build withstands occasional washdowns and the CM rear cover allows flexible mounting.
Acts as a robust stop gate for heavy inbound cartons, safely halting items weighing up to 32 kg vertically before the fixed TPU bumper pads absorb the impact.
When sizing this 40 mm bore model, compare it against the adjacent MI32 option, which yields 402.2 N of push at 0.5 MPa, or evaluate if the 40 mm is already the maximum required since it is the largest available bore in the MI family. If your application demands holding a load vertically during an air loss or valve centre state, note that the piston will drift; the TPU bumpers only decelerate the end of stroke and do not function as a brake. You must integrate an external rod lock or a pilot-operated check valve to secure the load. The CM back cover and 60 mm stroke keep the overall length compact, though ensuring proper guide alignment is critical to prevent rod bending under high side loads.
AirtacDistr lists every MI40 order code with its price on one page at https://airtacdistr.com/products/airtac-mi40-mini-air-cylinder
Quick checklist
This double-acting cylinder features a 1/4" port and an M12x1.25 male rod thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, increasing to 879.6 N push and 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
No, the piston will drift if air is lost or the valve is centred; the fixed TPU bumper pads only decelerate the stroke end and do not act as a lock. You need an external rod lock or pilot check valve for holding. Also, it does not have an adjustable air cushion; for that feature, look at the MIC variable cushion variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.