
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X75SRT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 75mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty actuation where smaller bores stall. The Ø40 mm stainless-steel barrel and Ø16 mm piston rod shrug off mild corrosion, making it superior to painted alternatives in damp or washdown environments. It is a riveted construction, not a tie-rod design, keeping the body compact while housing fixed TPU bumper pads to soften stroke-end impacts.
For practical sizing, plan for a safe working load of about 377 N, which equates to lifting roughly 32 kg vertically with a 2:1 safety margin. The rear R cover features an axial-in port orientation, and because this SKU includes the -S magnet, you can directly mount CMSG, DMSG or EMSG switches for position sensing. Air connects via a 1/4" port, and the male M12x1.25 rod thread secures your tooling. Order code MI40X75SRT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X75SRT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Provides the 628.3 N push force required to eject heavy stamped metal pins from a die block in automated fabrication lines.
Drives a robust routing gate on a packaging conveyor, using the 32 kg vertical lift equivalent to swing heavy cardboard cartons securely.
Acts as a high-force pneumatic stop gate at the end of roller conveyors to halt loaded pallets, leveraging the stainless build against dust.
When sizing this 75 mm stroke actuator, verify if the 628.3 N push at 0.5 MPa is truly necessary, as stepping down to the Ø32 bore yields 402.2 N of push force for lighter, more compact assemblies. There is no larger standard MI bore, so if your application exceeds the 879.6 N push capacity at 0.7 MPa, you must migrate to a different cylinder family entirely. The integrated -S magnet supports CMSG, DMSG and EMSG sensors, while standard LB foot, FA flange, SDB pivot, and TC trunnion mounts accommodate various chassis layouts.
Remember that the fixed TPU bumpers only decelerate the piston near the stroke end; they do not function as an adjustable air cushion. If air pressure drops or the valve is centred, the piston will drift and cannot maintain a held load. To prevent vertical drops, install an external rod lock or a pilot-operated check valve in your pneumatic circuit.
AirtacDistr lists every MI40 order code with its price on one page at https://airtacdistr.com/products/airtac-mi40-mini-air-cylinder
Quick checklist
At 0.5 MPa this double-acting cylinder provides 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, push increases to 879.6 N and pull to 738.9 N, with a theoretical maximum of 128.1 kgf at 1.0 MPa. The air port size is 1/4".
No, the piston will drift if air is lost or the valve is centred. The fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. For vertical loads, you must use an external rod lock or a pilot-operated check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.