
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X80UT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 80mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles heavy-duty actuation where smaller bores stall. The 40 mm bore operates on a 1/4" port and features an 80 mm stroke. Its stainless barrel and piston rod naturally resist mild corrosion, giving it a distinct edge over painted alternatives in damp or washdown-prone environments.
Built with fixed TPU bumper pads to decelerate the stroke end, the riveted construction remains compact while surviving demanding cycles. Plan for a safe working load of about 377 N, which means you can reliably lift a 32 kg part vertically with a 2:1 safety margin. The U back cover provides a 90-degree port and mounting orientation for tight machinery layouts. Order code MI40X80UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X80UT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Swings a heavy routing gate on a packaging line, using the 628.3 N thrust to push loaded pallets onto a secondary conveyor track.
Folds thick cardboard flaps on large shipping cartons, where the 80 mm stroke and 90-degree U cover provide the precise travel and rear-port clearance needed.
Knocks heavy metal blanks out of a die, relying on the stainless build to withstand oily coolant and the 377 N safe working load to clear the part.
When sizing this actuator, stepping down to the Ø32 bore drops the 0.5 MPa push force to 402.2 N, while no larger standard MI bore exists above 40 mm. If your mechanism must hold a vertical load during an air loss or valve shift, remember this base cylinder will drift; the TPU pads only soften the end of travel and act as neither a lock nor a brake. You must add an external rod lock or pilot-operated check valve for secure position holding.
This specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG reed switches for position sensing. You can pair it with LB foot, FA flange, or TC trunnion mounts. For high-speed cycles requiring adjustable air cushioning rather than fixed bumpers, consider the MIC variant.
AirtacDistr lists every MI40 order code with its price on one page at https://airtacdistr.com/products/airtac-mi40-mini-air-cylinder
Quick checklist
At 0.5 MPa it provides 628.3 N push and 527.8 N pull. At 0.7 MPa it provides 879.6 N push and 738.9 N pull. The theoretical maximum force is 128.1 kgf at 1.0 MPa. The air port size is 1/4".
No, this SKU does not include the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for sensing. It uses fixed TPU bumper pads for deceleration, not an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.