
The AirTAC SC Standard Cylinders SC63X225SH is a genuine double-acting standard air cylinder with a Ø63mm bore and 225mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC63X225SH is a double-acting SC tie-rod cylinder with a 63 mm bore and a 225 mm stroke. At 0.5 MPa it pushes about 1559 N and pulls about 1402 N; at 0.7 MPa that rises to 2182 N and 1962 N, and to 2806 N of push at 0.9 MPa. The 20 mm piston rod has an M16×1.5 male thread, and adjustable air cushions over 28 mm at both ends slow the piston before it reaches the end caps.
This order code comes with no mounting accessory, has a magnet in the piston so AirTAC magnetic position sensors can detect it, uses FKM seals and has PT1/4 ports. Operating pressure is 0.15–1.0 MPa and piston speed 30–800 mm/s.
| Model | Airtac SC Standard Cylinders SC63X225SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (approx.) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
About 1559 N at 0.5 MPa holds parts in jigs and welding or machining fixtures, with 225 mm of travel to clear the part when the fixture opens.
Pushes cartons, castings or trays across a conveyor or into a chute; the adjustable cushions keep the end of each stroke quiet at speed.
Press-fits, stamping assists and lifting gates that need more force than a 50 mm bore gives; 2182 N of push at 0.7 MPa before friction and safety margin.
For lighter loads the SC50 (982 N at 0.5 MPa) is the next size down; the SC80 (2513 N) gives about 60% more push than this 63 mm bore. Longer strokes add side load on the rod, so guide the load rather than the piston rod where you can.
When you replace a cylinder, match five points: 63 mm bore, 225 mm stroke, PT1/4 port thread, mounting (basic) and magnet (yes). The H code selects FKM seals for hot running; tell us your operating temperature when you ask for a quote.
AirtacDistr lists every SC63 order code with its price on one page at https://airtacdistr.com/products/airtac-sc63-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa it pushes about 1559 N and pulls about 1402 N; at 0.7 MPa 2182 N and 1962 N. The theoretical maximum at 1.0 MPa is 318 kgf. Usable force is lower because of friction and back-pressure, so size with a margin.
Bore 63 mm, stroke 225 mm, PT1/4 ports, mounting basic and a magnetic piston. If you are replacing another make or type, check the mounting dimensions on the drawing as well.
Yes. The S in the code means the piston carries a magnet, so AirTAC magnetic position sensors can signal both stroke ends to the PLC.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.