verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC Standard Cylinders SC63X230TC

The AirTAC SC Standard Cylinders SC63X230TC is a genuine double-acting standard air cylinder with a Ø63mm bore and 230mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ63 mm
  • Stroke230 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 28 mm
$91.08 $98.58Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC63 stroke, mounting and version on one page All SC63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC Standard Cylinders SC63X230TC

The AirTAC SC63X230TC is a double-acting SC tie-rod cylinder with a 63 mm bore and a 230 mm stroke. At 0.5 MPa it pushes about 1559 N and pulls about 1402 N; at 0.7 MPa that rises to 2182 N and 1962 N, and to 2806 N of push at 0.9 MPa. The 20 mm piston rod has an M16×1.5 male thread, and adjustable air cushions over 28 mm at both ends slow the piston before it reaches the end caps.

This order code comes with the TC centre trunnion, has no piston magnet, uses TPU seals and has PT1/4 ports. Operating pressure is 0.15–1.0 MPa and piston speed 30–800 mm/s.

Airtac SC Standard Cylinders SC63X230TC Technical Specifications

ModelAirtac SC Standard Cylinders SC63X230TC
SeriesSC standard tie-rod cylinder
Bore sizeØ63 mm
Stroke230 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 28 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (approx.)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC Standard Cylinders SC63X230TC

SCStandard tie-rod cylinder series.
63Bore size in mm.
×230Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC Standard Cylinders SC63X230TC Is Used

precision_manufacturing

Clamping and hold-down fixtures

About 1559 N at 0.5 MPa holds parts in jigs and welding or machining fixtures, with 230 mm of travel to clear the part when the fixture opens.

conveyor_belt

Pushers and diverters

Pushes cartons, castings or trays across a conveyor or into a chute; the adjustable cushions keep the end of each stroke quiet at speed.

compress

Pressing and lifting

Press-fits, stamping assists and lifting gates that need more force than a 50 mm bore gives; 2182 N of push at 0.7 MPa before friction and safety margin.

Is the Airtac SC Standard Cylinders SC63X230TC the Right Cylinder?

For lighter loads the SC50 (982 N at 0.5 MPa) is the next size down; the SC80 (2513 N) gives about 60% more push than this 63 mm bore. Longer strokes add side load on the rod, so guide the load rather than the piston rod where you can.

When you replace a cylinder, match five points: 63 mm bore, 230 mm stroke, PT1/4 port thread, mounting (TC) and magnet (no). If you want to fit position sensors later, order SC63X230STC, the same code with the S magnet.

AirtacDistr lists every SC63 order code with its price on one page at https://airtacdistr.com/products/airtac-sc63-tie-rod-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC Standard Cylinders SC63X230TC FAQ

At 0.5 MPa it pushes about 1559 N and pulls about 1402 N; at 0.7 MPa 2182 N and 1962 N. The theoretical maximum at 1.0 MPa is 318 kgf. Usable force is lower because of friction and back-pressure, so size with a margin.

Bore 63 mm, stroke 230 mm, PT1/4 ports, mounting TC and a non-magnetic piston. If you are replacing another make or type, check the mounting dimensions on the drawing as well.

No, this code has no piston magnet. Order SC63X230STC, which is the same cylinder with a magnet for AirTAC position sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC Standard Cylinders SC63X230TC

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.