verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC Standard Cylinders SC63X80SN

The AirTAC SC Standard Cylinders SC63X80SN is a genuine double-acting standard air cylinder with a Ø63mm bore and 80mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ63 mm
  • Stroke80 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 28 mm
$63.86 $71.36Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC63 stroke, mounting and version on one page All SC63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC Standard Cylinders SC63X80SN

The AirTAC SC63X80SN is a double-acting SC tie-rod cylinder with a 63 mm bore and a 80 mm stroke. At 0.5 MPa it pushes about 1559 N and pulls about 1402 N; at 0.7 MPa that rises to 2182 N and 1962 N, and to 2806 N of push at 0.9 MPa. The 20 mm piston rod has an M16×1.5 male thread, and adjustable air cushions over 28 mm at both ends slow the piston before it reaches the end caps.

This order code comes with no mounting accessory, has a magnet in the piston so AirTAC magnetic position sensors can detect it, uses NBR seals and has PT1/4 ports. Operating pressure is 0.15–1.0 MPa and piston speed 30–800 mm/s.

Airtac SC Standard Cylinders SC63X80SN Technical Specifications

ModelAirtac SC Standard Cylinders SC63X80SN
SeriesSC standard tie-rod cylinder
Bore sizeØ63 mm
Stroke80 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 28 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (approx.)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC Standard Cylinders SC63X80SN

SCStandard tie-rod cylinder series.
63Bore size in mm.
×80Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC Standard Cylinders SC63X80SN Is Used

precision_manufacturing

Clamping and hold-down fixtures

About 1559 N at 0.5 MPa holds parts in jigs and welding or machining fixtures, with 80 mm of travel to clear the part when the fixture opens.

conveyor_belt

Pushers and diverters

Pushes cartons, castings or trays across a conveyor or into a chute; the adjustable cushions keep the end of each stroke quiet at speed.

compress

Pressing and lifting

Press-fits, stamping assists and lifting gates that need more force than a 50 mm bore gives; 2182 N of push at 0.7 MPa before friction and safety margin.

Is the Airtac SC Standard Cylinders SC63X80SN the Right Cylinder?

For lighter loads the SC50 (982 N at 0.5 MPa) is the next size down; the SC80 (2513 N) gives about 60% more push than this 63 mm bore. Longer strokes add side load on the rod, so guide the load rather than the piston rod where you can.

When you replace a cylinder, match five points: 63 mm bore, 80 mm stroke, PT1/4 port thread, mounting (basic) and magnet (yes). The N code selects NBR seals.

AirtacDistr lists every SC63 order code with its price on one page at https://airtacdistr.com/products/airtac-sc63-tie-rod-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC Standard Cylinders SC63X80SN FAQ

At 0.5 MPa it pushes about 1559 N and pulls about 1402 N; at 0.7 MPa 2182 N and 1962 N. The theoretical maximum at 1.0 MPa is 318 kgf. Usable force is lower because of friction and back-pressure, so size with a margin.

Bore 63 mm, stroke 80 mm, PT1/4 ports, mounting basic and a magnetic piston. If you are replacing another make or type, check the mounting dimensions on the drawing as well.

Yes. The S in the code means the piston carries a magnet, so AirTAC magnetic position sensors can signal both stroke ends to the PLC.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC Standard Cylinders SC63X80SN

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.