
The AirTAC SC Standard Cylinders SC63X850H is a genuine double-acting standard air cylinder with a Ø63mm bore and 850mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC63X850H is a double-acting SC tie-rod cylinder with a 63 mm bore and a 850 mm stroke. At 0.5 MPa it pushes about 1559 N and pulls about 1402 N; at 0.7 MPa that rises to 2182 N and 1962 N, and to 2806 N of push at 0.9 MPa. The 20 mm piston rod has an M16×1.5 male thread, and adjustable air cushions over 28 mm at both ends slow the piston before it reaches the end caps.
This order code comes with no mounting accessory, has no piston magnet, uses FKM seals and has PT1/4 ports. Operating pressure is 0.15–1.0 MPa and piston speed 30–800 mm/s.
| Model | Airtac SC Standard Cylinders SC63X850H |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (approx.) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
About 1559 N at 0.5 MPa holds parts in jigs and welding or machining fixtures, with 850 mm of travel to clear the part when the fixture opens.
Pushes cartons, castings or trays across a conveyor or into a chute; the adjustable cushions keep the end of each stroke quiet at speed.
Press-fits, stamping assists and lifting gates that need more force than a 50 mm bore gives; 2182 N of push at 0.7 MPa before friction and safety margin.
For lighter loads the SC50 (982 N at 0.5 MPa) is the next size down; the SC80 (2513 N) gives about 60% more push than this 63 mm bore. Longer strokes add side load on the rod, so guide the load rather than the piston rod where you can.
When you replace a cylinder, match five points: 63 mm bore, 850 mm stroke, PT1/4 port thread, mounting (basic) and magnet (no). If you want to fit position sensors later, order SC63X850SH, the same code with the S magnet. The H code selects FKM seals for hot running; tell us your operating temperature when you ask for a quote.
AirtacDistr lists every SC63 order code with its price on one page at https://airtacdistr.com/products/airtac-sc63-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa it pushes about 1559 N and pulls about 1402 N; at 0.7 MPa 2182 N and 1962 N. The theoretical maximum at 1.0 MPa is 318 kgf. Usable force is lower because of friction and back-pressure, so size with a margin.
Bore 63 mm, stroke 850 mm, PT1/4 ports, mounting basic and a non-magnetic piston. If you are replacing another make or type, check the mounting dimensions on the drawing as well.
No, this code has no piston magnet. Order SC63X850SH, which is the same cylinder with a magnet for AirTAC position sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.